What exhaust tips fit on a 997.2 with pse?
 

Any pics would be great also.

Almost any tips will fit. Go to a custom exhaust shop and look at what they have.

dont pse have 2 pipes that come out not one like most tips use

PSE Tips
 

These are the two types of OEM Porsche exhaust tips that will fit .2 PSE systems.

The black (black painted outer diameter/polished stainless steel inner diameter) tips are from and come standard on GTS 997.2 cars.

The silver (silver outer diameter black inner diameter painted) ones come standard on 997.2 PSE cars.

Both are interchangeable with each other as they are mechanically identical except for the paint/surface finish.

The rear of each tip has tow (2) pipe inlets to accommodate the twin PSE pipes. One of those two rear (inlets) has a clamping mechanism for holding the tips onto the actual PSE tubes.

I hope this helps you out.

Attachment 186263

Attachment 186264

Attachment 186265

good info! i have a 997.2 PSE, but where can I purchase the GTS PSE black tips? i didn't see it in suncoast parts... thanks in advance

You just ask Suncoast to order them! They didn't list on their website!!!

A popular request lately, just added them to the site:

Suncoast Porsche Parts - GTS Tips

PSE Tips..
 

If you or anyone is interested, I'm having the silver/black PSE tips (shown above) refinished to match the GTS tips. When done making them identical to the GTS tips in my above photos.

I was going to save them for an extra set. However, am now thinking of posting them for sale at a significant savings over new ones from Suncoast.

They are new and never used having come with a new complete PSE system I ordered from Suncoast. Like many I just didn't like the silver so I bought the GTS tips at the same time. As you can see they are not inexpensive.

997.2 exhaust and intake parts
 

Got the following for sale: fabspeed cold air intake, B&B polished steel quad tips, and B&B sport mufflers for sale. 6 months in use. email for prices, nickdef1@aol.com

Just run the regular ones for a while, the soot turns them black by them selves, no need to change out for black!!

Bit of a bump!

Are there any other styles of exhaust tips that would fit onto the C2S 997.2 PSE apart from the dual sleeved OEM ones?

Will PSE tips fit non-PSE exhaust?

Yes, as long as it's the exhaust from an S since the base car (at least on the .1s) have smaller pipe diameter. The issue you'll have is that since the PSE tips have 2 distinct inlets, one of the tips will never have exhaust coming from it and you'll be able to see straight through it. The PO of my car had fitted FVD Mufflers and reused the PSE tips. The dummy opening bugged me and I changed the exhaust to a full Fabspeed Valvetronic setup that works with the factory PSE wiring and custom RUF tips to work with the RUF bumper.

Here's a pic to show you the issue with PSE tips on a non-PSE car.

https://cimg2.ibsrv.net/gimg/www.6sp...54d31e029d.jpg