Camber plates issue - too thick, no threads
Thread Starter
|
Registered User
Joined: Mar 2017
Posts: 8
From: California
Rep Power: 0
Camber plates issue - too thick, no threads
Does anyone know where I can get the correct sized spring perch top hat or bushing/spacer so I can bolt my coilovers together?
The top hat currently uses a spacer/bushing that makes stacking the camber plates on top too tall for everything to bolt together. Based on my measurements, I need a 2.25" spring perch/hat with a 14mm opening for the shock shaft.
The top hat currently uses a spacer/bushing that makes stacking the camber plates on top too tall for everything to bolt together. Based on my measurements, I need a 2.25" spring perch/hat with a 14mm opening for the shock shaft.