996 Turbo Twist Wheels????
Thread Starter
|
Registered User
Joined: Mar 2006
Posts: 739
From: Scottsdale, Az
Rep Power: 51
996 Turbo Twist Wheels????
Guys - will a set of 03' 996 Turbo Twist (stock wheels 18") fit on a 997 Carrera? I was wondering if they will work as track wheels?
please advise
please advise
Last edited by AzExoticLover; Aug 20, 2006 at 06:01 PM.
Registered User
Joined: Jul 2004
Posts: 732
From: ARIZONA
Rep Power: 52
If the car is a "widebody" 997, your standard offsets for the front is 57mm and 51mm for the rear. If it is a standard "narrow" 997 the the fronts are still 57mm but the rears are now 67mm.
The 996tt rear offset is 45mm and 50mm for the front.
The fronts should work with a small spacer (7mm or less). To use the 996tt rears for a "wide" body 997 may work due to the wheel only adding 6mm (around 1/4") to the overall width per side.
996tt rears on a "narrow" 997 will add close to 1" or 22mm to the overall width per side. I don't believe even fender rolling and aggressive camber settings will make these fit.
Hope this helps!
-z
The 996tt rear offset is 45mm and 50mm for the front.
The fronts should work with a small spacer (7mm or less). To use the 996tt rears for a "wide" body 997 may work due to the wheel only adding 6mm (around 1/4") to the overall width per side.
996tt rears on a "narrow" 997 will add close to 1" or 22mm to the overall width per side. I don't believe even fender rolling and aggressive camber settings will make these fit.
Hope this helps!
-z
Originally Posted by AzExoticLover
Guys - will a set of 03' 996 Turbo Twist (stock wheels 18") fit on a 997 Carrera? I was wondering if they will work as track wheels?
please advise
please advise
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
996 Turbo Vendor Classifieds
0
Aug 20, 2015 02:40 PM
PelicanParts.com
996 Vendor Classifieds
0
Aug 18, 2015 03:45 PM
PelicanParts.com
996 Turbo Vendor Classifieds
0
Aug 18, 2015 03:43 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
Aug 18, 2015 03:42 PM
