guys am going to dyno my 997tt in rwd mode .. which i need some info about that

anyway i know it will not show me real numbers because its rwd but at least i want to know the car power in this level ,, after that i will dyno the car after install all the upgrades and compare it.

the upgrades am going to do :-

1-install 80lb , so that i can run high boost.

2-upgrading the gearbox , to let the gearbox hold the extra power and not sliping between shiftings.

3-install the NGK spark plugs 2667 of BKR7EIX recommended by scott softronic

4-get custem tune from scott.

what i need to know ?

dyno the 997TT with rwd mode need
-Disconnect the driveshaft.
-Pull the abs/psm fuses.

My question is :

where can i find the fuses box and where the abs/psm fuses located inside the box ??



thanks


yousef

 

I never had to pull an ABS fuse but also never done a TIP, as far as the numbers not being real is not true you are getting a baseline so it really doesn't matter what it makes as long as the mods add power is what counts.

Chris Green

 

chris .. it could be tip different than 6speed ..

anyway i will see what is gona happend

thanks alot bro .. btw nice yellow car , love it

 

i went to the workshop but Unfortunately there were alot of cars
so we could not disconnect the driveshaft .. we will do it tomorrow




this is the fuses place near the Pedals in the left






i asked the workshop guy how he will do it
he said that the ( fuse 10 ) in C row which its PSM CONTROL UNIT must be out ...







we searched for the ABS fuse but we could not find it ...

can anybody tell me where it is ??


any more information will be Grateful ..


thanks alot

 

Well...i believe abs/psm fuse should be the same...also after disconnecting drive shaft,just give it a try with psm off...It might work...

 

I wouldn't do that if I were...
I'd make sure to remove the fuse before trying anything...