Building upon over a decade’s worth of experience with turbocharged Audi and VW engines, including over half a decade with direct injected engines, APR’s Engineers have taken the 2.0T FSI to ground breaking levels of performance without compromise.

APR is pleased to introduce the 2.0T FSI Stage III GTX Turbocharger System. Producing over 405 horsepower on 93 (R+M)/2 octane and 449 HP in racing configurations, Stage III GTX places the 2.0T FSI's accelerative performance in the same league as that of large V8 supercharged muscle cars and sub $400,000 exotic sports cars.

The new APR Stage III GTX Turbocharger System represents a large leap in technology over our previously available GT Turbocharger System. The new system’s response is much quicker, spooling hundreds of RPM sooner thanks to the latest in Garrett turbocharger technology and advancements in the ECU Upgrade. Further refinement of the fueling system increases the vehicle's reliability and drivability to levels only matched by the OEM. A substantial increase in horsepower and torque results in roughly a 30-50 HP gain in the area under the curve over the previous system. As you hear a new exotic growl from your exhaust system, expect exhilarating g-force levels sure to put a huge grin on your face!

Turbocharger



At the heart of Stage III GTX is a GTX2867R turbocharger, consisting of the latest technologies from Le Mans’ winning turbo manufacturer, Garrett Honeywell. The internally gated unit features a fully-machined, ten-blade billet compressor wheel and a dual ball bearing oil and water-cooled CHRA. APR’s Engineers spent countless hours testing turbine inlet and A/R sizes in order to decrease turbocharger lag without negatively impacting peak power. The newly developed compressor housing utilizes anti-surge porting, which greatly complements the lightning fast spool characteristics of this unit and grants APR’s Engineers the ability to deliver massive levels of torque inducing boost pressure, even in the lower RPM range.

Each turbocharger unit is assembled and clocked in house at APR with the necessary brackets to ensure proper wastegate fitment and orientation. Each wastegate is then calibrated for precise operation and control to ensure seamless integration with the expertly recalibrated OEM engine management system.


APR Stage III GTX Software



The factory Bosch MED 9 engine management system is responsible for proper operation of the engine in all conditions. With built in compensational data for environmental variables and varying load conditions, the factory ECU is far more complex and intelligent than units found in other vehicle makes and marks.

With the significant amount of changes included in the APR Stage III GTX Turbocharger System, APR’s Engineers spent months recalibrating the engine management system to operate smoothly as if intended by the OEM. Thanks to APR’s incredible proprietary calibration suite, data logging software and full access to the coding structure of the ECU, appropriate and intelligent changes are made to ensure flawless drivability and excellent performance without compromise.

APR’s EMCS program switching technology puts control of the ECU in your finger tips allowing you to access modes for standard pump fuel, high output race fuel and even reduced output valet modes to protect your vehicle against improper use by other individuals. This technology is patented by APR and is found nowhere else in the world. It’s Performance Without Compromise only APR can deliver!


Exhaust Manifold



Attached to the turbocharger is APR’s investment-cast, super alloy, nickel-chromium-based Inconel 625 Manifold featuring APR’s Sequential Exhaust Pulse runner lengths. Unlike hand welded tubular manifolds, Inconel is a very high temperature resistant material designed to withstand extreme exhaust gas temperature changes without expanding, contracting, melting or cracking under stress. This material is typically found only at the highest levels of professional motorsport racing where reliability is essential to success.

Investment-cast Inconel features heat retention characteristics which aid in turbo response by keeping exhaust velocity high. Ensuring each exhaust pulse arrives at the collection point without collision is critical to producing lightning fast response and immediate torque delivery. Using 3D modeling and computational fluid dynamics software, APR’s Engineers designed varying short runner lengths calibrated to deliver sequential exhaust pulses without collision. A reduction in backpressure from the high flow design directly enhances power delivery.

Each manifold is investment-cast in the United States of America and machined in house on APR’s CNC machines to ensure high casting tolerances, repeatable results and strict quality control. The thick casting material reduces unwanted exhaust noise leaving behind a powerful and exotic growl.

All of these characteristics result in a manifold designed without compromise backed by a confidence inspiring lifetime warranty.

Induction and Charge Piping



Wire reinforced, multi-ply silicone hoses provide an unrestricted path for airflow to enter and exit the turbocharger at over 1,000 kilograms per hour. The ultra rigid design ensures boost and vacuum piping will not swell or collapse causing leaks and restrictions in the induction and charge piping system supporting boost response and turbo recovery. Each hose is engineered to fit properly into the 2.0T FSI engine bay with all necessary emissions and reference ports securely affixed.

APR’s Easy-Flow Silicone Hose design features stepped mounting surfaces for smooth transitions from one pipe to another. Traditional designs simply sit on top of each other, often resulting in a disruptive airflow path. By using the stepped design, hoses fit properly without airflow restrictions, resulting in the most ideal path for moving air through the turbocharger and into the engine.


Turbo Outlet Pipe



To provide unrestricted and smooth airflow from the turbocharger to the intercooler, the APR Stage III GTX Turbocharger System includes a cast enlarged turbo outlet pipe to properly deliver the additional airflow from the larger turbocharger.


Mass Airflow Housing



The 2.0T FSI's engine management relies on load calculations to accurately control the engine. Calculations are made by measuring airflow across the Mass Airflow Sensor and this is a critical component of the APR Stage III GTX Turbocharger System.

The small and restrictive factory unit is removed and replaced with the much larger housing. To ensure accuracy, APR’s MAF housing is cast in the United States of America and CNC machined in house at APR to ensure repeatable results. The long, precision-machined housing features a honeycomb airflow straightener to further aid in accurately reading airflow levels. Simply enlarging the MAF housing is not permissible without accurate adjustments to the factory engine management system, which is included with APR Stage III GTX Turbocharger System.


Oil and Coolant Lines



APR’s oil and coolant lines are specific to the 2.0T FSI Stage III GTX System and provide years of leak free operation. The oil lines feature flexible braided stainless steel with CNC mandrel bent hard-lines for specific and clean hose routing as if intended by the OEM.


Low Pressure Fuel Pump System



The APR Low Pressure Fuel Pump System is a complete, OEM style, PWM controlled drop in fuel pump and controller solution designed to fit cleanly in the OEM location. The upgraded pump provides adequate low-pressure fuel to the APR High Pressure Fuel Pump to support the power levels produced by the APR Stage III GTX Turbocharger System.


High Pressure Fuel Rail Valve



The factory 2.0T gasoline direct injection injectors require higher than factory fuel rail pressure to achieve targeted air fuel ratios under high load, wide open throttle operation. APR’s Low Pressure Fuel Pump delivers the desired volume of fuel to the APR High Pressure Fuel Pump, which provides increased fueling headroom over the factory unit. However, the factory High Pressure Fuel Rail Valve limits maximum rail pressure below the desired level. The included APR High Pressure Fuel Rail Valve is calibrated to increase the maximum rail pressure to levels necessary for proper operation.

In doing so, APR’s able to support far higher horsepower levels than achievable on the existing APR Stage III GTX Turbocharger Systems without the need to alter the OEM correct-spray-pattern injectors. This results in smoother part throttle operation, factory-like cold starts and fewer unburned hydrocarbons emitted from the tailpipe under all conditions compared to other fueling options.


Downturn and Downpipe



The GTX2867R internally gated turbocharger unit features a Garrett five-bolt flange, which differs from the OEM turbocharger flange. To support this design, the APR Stage III GTX Turbocharger System includes cast stainless steel exhaust downturn and downpipe, which mates directly to an APR Midpipe, Downpipe or Turboback Exhaust System.


Nuts, Bolts, Gaskets, Washers, Clamps, Fittings, etc



Every APR Stage III GTX Turbocharger System includes all necessary components for a complete install.


Bracketry



No matter how small the part, each piece of the APR Stage III GTX Turbocharger System oozes with quality evident in pieces like the Stage III GTX's laser cut ancillary brackets and carriers.


Spark Plugs



Proper temperature range spark plugs are included with each APR Stage III GTX Turbocharger System.


But what's all this info without some dyno numbers to back it up? APR's got those for you too!

Stage 3 GTX 91 CHP


Stage 3 GTX 93 CHP


Stage 3 GTX 100 CHP



As a proud APR dealer, we carry the entire APR line. For more on this kit, click here or contact us!

 

If you have any questions at all, feel free to message us or comment below!

 

Now is the perfect time to take advantage of this and many other great offerings from APR as their Winter Sale runs from now until January 4th. If you have an Audi owner on your holiday gift list or if your own Audi is on your gift list, be sure to snag the great upgrades available from APR!

 

Bump for a really, really cool system!

 

Do these upgrades do anything to remove the terrible throttle response issue seen with many of the later model VW's?

I don't mean turbo lag, but actual throttle response, as in the time it takes for the engine to receive the message that the throttle has been opened?

I know it is an electronic issue, not turbo lag.

I have a 2011 Tiguan, and I have driven a 2013 Passat, both of which have exhibited a pronounced hesitation when going from closed throttle to partial throttle.

Generally, it occurs at low speeds, such as rolling up to a stop, then getting back into the throttle to move into traffic.

There is a pronounced "hesitation" that occurs, and it can be potentially dangerous.

The VW dealer says it is normal, but it is not like any other car I have ever driven, and that would be quite a few types of vehicles.
Others with VW cars have said the same thing.