Greddy profec oled ebc
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 726
From: beirut lebanon
Rep Power: 54
Greddy profec oled ebc
Hello,
i just purchased a 997.1tt tip with alpha tial 30/76 turbos controlled by greddy proffec oled boost controller.
usually i use HKS ebc.would you please share your greddy settings .
Actually i am running :
start 13.5psi (WG preload 14.5psi)
set 45%
gain 6
with those settings i am running a solid 18.5psi spiking to 21.5psi.
please share your settings and recommendations.
Thank you!
Ali
i just purchased a 997.1tt tip with alpha tial 30/76 turbos controlled by greddy proffec oled boost controller.
usually i use HKS ebc.would you please share your greddy settings .
Actually i am running :
start 13.5psi (WG preload 14.5psi)
set 45%
gain 6
with those settings i am running a solid 18.5psi spiking to 21.5psi.
please share your settings and recommendations.
Thank you!
Ali
Registered User
Joined: Nov 2008
Posts: 833
From: France
Rep Power: 85
Hello,
i just purchased a 997.1tt tip with alpha tial 30/76 turbos controlled by greddy proffec oled boost controller.
usually i use HKS ebc.would you please share your greddy settings .
Actually i am running :
start 13.5psi (WG preload 14.5psi)
set 45%
gain 6
with those settings i am running a solid 18.5psi spiking to 21.5psi.
please share your settings and recommendations.
Thank you!
Ali
i just purchased a 997.1tt tip with alpha tial 30/76 turbos controlled by greddy proffec oled boost controller.
usually i use HKS ebc.would you please share your greddy settings .
Actually i am running :
start 13.5psi (WG preload 14.5psi)
set 45%
gain 6
with those settings i am running a solid 18.5psi spiking to 21.5psi.
please share your settings and recommendations.
Thank you!
Ali
I run one for a few weeks in my built 993TT with k24/18g turbos. (Cool stuff but "lighter" vs our EVC6)
This EBC let the turbos work on the wg until the "START BOOST" value, on my car wg are set 0,45(oem) and SB set at 0,8.
I noticed the later you set the SB the better is the spool.
"SET" is the boost target from the WG basis, you lower or raise the boost with it (mine is 60% on low boost and 72% on high boost).
GAIN is raising the boost target (SET) from the spool to the redline, 6% is almost flat. You can use this function to help too small turbos to keep boost at top end for example, or to map a kind of ramp up after the torque.
You speak about a 21,5 psi "spike" from 18,5:
-if the spike is before regular 18,5 a lower START BOOST value will avoid it.
-if the spike is at top end a lower GAIN will avoid it.
Cheers,
P.
Thread Starter
|
Registered User
Joined: Mar 2009
Posts: 726
From: beirut lebanon
Rep Power: 54
Hi Ali,
I run one for a few weeks in my built 993TT with k24/18g turbos. (Cool stuff but "lighter" vs our EVC6)
This EBC let the turbos work on the wg until the "START BOOST" value, on my car wg are set 0,45(oem) and SB set at 0,8.
I noticed the later you set the SB the better is the spool.
"SET" is the boost target from the WG basis, you lower or raise the boost with it (mine is 60% on low boost and 72% on high boost).
GAIN is raising the boost target (SET) from the spool to the redline, 6% is almost flat. You can use this function to help too small turbos to keep boost at top end for example, or to map a kind of ramp up after the torque.
You speak about a 21,5 psi "spike" from 18,5:
-if the spike is before regular 18,5 a lower START BOOST value will avoid it.
-if the spike is at top end a lower GAIN will avoid it.
Cheers,
P.
Thank you very much for the infos.
Ali
Registered User
Joined: Nov 2008
Posts: 833
From: France
Rep Power: 85
For example a 45% SET value with a 17psi WG will perhaps give 18,5PSI target boost, with a 10PSI WG you should need something like 65% to reach 18,5PSI.
Adjust your SET value to achieve your boost target with your setup.
(Anyway my 997.1 is not fitted with a Greedy)
Thread
Thread Starter
Forum
Replies
Last Post
BlackHorseTurbo
Automotive Parts & Accessories For Sale/Wanted
0
Apr 27, 2016 05:19 PM
John@SpeedTech
Automotive Parts & Accessories For Sale/Wanted
2
Jul 25, 2009 09:24 AM
markski@markskituning
Automotive Parts & Accessories For Sale/Wanted
1
Jul 22, 2008 04:03 PM