Anyone have a wiring diagram/instructions for constant and accessory?
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 125
Rep Power: 19
Anyone have a wiring diagram/instructions for constant and accessory?
Hi all.
I'm trying to install a Garmin dash cam and want to hard wire it. I initially thought to tap into the fuse box with add-a-circuit fuses, but it will be a tight fit.
Does anyone know where I can find information on which wires to tap into??...preferably easily accessible and under the dash for a constant wire and an accessory wire?
Thanks in advance!
I'm trying to install a Garmin dash cam and want to hard wire it. I initially thought to tap into the fuse box with add-a-circuit fuses, but it will be a tight fit.
Does anyone know where I can find information on which wires to tap into??...preferably easily accessible and under the dash for a constant wire and an accessory wire?
Thanks in advance!
Registered User
Joined: Oct 2012
Posts: 447
From: Orange County
Rep Power: 137
This thread should definitely help you.... https://www.6speedonline.com/forums/...soldering.html
Registered User
Joined: Oct 2012
Posts: 447
From: Orange County
Rep Power: 137
Oh yeah, if your dash cam doesn't come with a direct wire kit, you might want to buy one off of Amazon, etc. Just search for hard wire micro USB or hard wire mini USB depending on the type of connector you have. You will want to step power down to 5V to your dash cam, so, find a hardwire kit that is as compact as possible so you can either keep it behind the "upper console" or more likely, the headliner.
Thread Starter
|
Registered User
Joined: Oct 2012
Posts: 125
Rep Power: 19
Thanks for the reply. I actually need access to under the dash because I bought the Garmin parking module which has a 2”x2” box and would never fit in the headliner or windshield. This module is required for the dash cam to work in parking mode.
Thread
Thread Starter
Forum
Replies
Last Post
pwdrhound
996 Turbo / GT2
7
Sep 9, 2015 10:34 AM
DW997s
997
2
Mar 28, 2010 03:23 PM