VelocityAP V8 Vantage 2011-on Secondary Cat Delete XPipe
 

Hi Everyone,

We've been asked for this product so many times & had to point customers elsewhere to purchase it, but finally managed to get it built. First one will be at a special price :)

http://www.velocityap.com/Aston-Mart...decatxpipe.htm

https://cimg4.ibsrv.net/gimg/www.6sp...694a57b32b.jpg

https://cimg5.ibsrv.net/gimg/www.6sp...177366fba9.jpg

https://cimg6.ibsrv.net/gimg/www.6sp...0da01b0ca8.jpg

https://cimg8.ibsrv.net/gimg/www.6sp...aab38977fd.jpg

Looks great, Stuart! LOVING the 4.3L X-pipe you made for me. A bit more mellow through the 'hood, but more of everything you like when you give it the beans.

Ok, I'll bite.


Please PM me for that special pricing and instructions.


Thanks.

PM Sent

Hi Stuart
Just interested on mounting with the fixed x-pipe with the manifold studs that are in the headers. they are angled inward and wont allow a fixed setup to go on or off. They are also pretty hard to remove.
I learned this when I tacked my cats together to start the process of making the x-pipe with Fabspeed and then couldn't get them off because of the darn studs

If you're struggling I would just undo the bolts holding the hangers for the link pipes and remove those. There should be enough movement on the hangers to shift the entire rear part of the exhaust back a couple of inches.

Also, if you ever want to remove manifold studs (say for header removal) the AM studs use an E7 socket - it's basically an inverted Torx.

actually its the studs at the header to cat mount. The headers angle in at about a 15* angle and have 2 studs that angle inward as well. With a fixed x-pipe you cant slide it over these studs. It is why the fab speed uses a 3 piece design with clamps. Not a huge issue but I just brought it up because it would be a pain to find out while lying on your back trying to connect the pipe to the headers. I agree there is plenty of room to push the exhaust back remove the cats.

Thank you Stuart for such an awesome price!

Send me pricing please?

Stuart can you pm me special price ?

Hi Stuart,
I have a 2009 AMV8,i have RSC exhaust,Tune and Filters,will this go well with what i have?
Can you PM me the special pricing?

Hi Stuart
Has anyone considered adding this along with your midsection x ?
Would there be any additional hp gain or sound enhancement with a double crossover?

Still waiting for pricing Stuart. Just a friendly reminder. Thanks!

This part won't fit on your car - the cat and manifold configuration changed over in 2011 MY, so this will only fit the later MY cars.

We do offer an XPipe center section which will fit your car, on a $400 core exchange basis: http://www.velocityap.com/Aston-V8-V...pipecenter.htm