How to get a vantage into neutral
Thread Starter
|
Registered User
Joined: Feb 2015
Posts: 26
From: LA
Rep Power: 13
How to get a vantage into neutral
Does anyone know how to get a 2011 vantage sportshift into neutral with no way to get power to the car.
car has a damaged wiring harness so paddles and buttons won’t work.
car has a damaged wiring harness so paddles and buttons won’t work.
Registered User
Joined: Jan 2015
Posts: 1,705
From: Florida
Rep Power: 101
never thought about this... interested in responses
Thread Starter
|
Registered User
Joined: Feb 2015
Posts: 26
From: LA
Rep Power: 13
For anyone who might need this. This is what Chris from VAP told me.
“Hello, if you cannot use the paddles on steering wheel or the N button in dash, only other way is to drop the transmission, remove the shifter and slide over the shifter fork. It might be possible to pin the TCU at connector but would need to know resistance of the circuit for when the N button is pressed and simulate a switch pressed at the TCU connector.
Kind regards,
Christopher Edgett”
“Hello, if you cannot use the paddles on steering wheel or the N button in dash, only other way is to drop the transmission, remove the shifter and slide over the shifter fork. It might be possible to pin the TCU at connector but would need to know resistance of the circuit for when the N button is pressed and simulate a switch pressed at the TCU connector.
Kind regards,
Christopher Edgett”
Thread
Thread Starter
Forum
Replies
Last Post
Prefurbia
Aston Martin
9
Oct 15, 2021 10:26 AM