GT3 Exhaust Tips - Make Great Desk Accessories!
Category: Engine - Exhaust
Price: $25
Private or Vendor Listing: Vendor Listing
Part fits: Porsche 911 997 Non-Turbo, Other
Location (State): CA
Item Condition: Brand New
Shipping Information: Item can be shipped
Thread Starter
|
Former Vendor
Joined: Mar 2009
Posts: 1,052
From: Costa Mesa, California
Rep Power: 0
Haha. These are night vision compatible.
Thread Starter
|
Former Vendor
Joined: Mar 2009
Posts: 1,052
From: Costa Mesa, California
Rep Power: 0
We're all sold out again. I'll let you know if any others come available.
Registered User
Joined: Oct 2012
Posts: 220
From: Fresno, Ca
Rep Power: 23
Thread Starter
|
Former Vendor
Joined: Mar 2009
Posts: 1,052
From: Costa Mesa, California
Rep Power: 0
I want a set please sell me one. Pay pal me invoice at miguelestrada02@yahoo.com
Take care,
B
Thread Starter
|
Former Vendor
Joined: Mar 2009
Posts: 1,052
From: Costa Mesa, California
Rep Power: 0
Polished Stainless
spyerx,
Hope all is well - we don't have any more of our RSS Black Tips on special.
I do have 3 sets of the larger angle cut tips in polished stainless steel. These are Cargraphic brand from Germany. Normal retail on them is over $500 but they have been on the shelf for some time and need to be polished, brushed or they can even be high heat painted or ceramic coated if desired due to some slight discoloration near the base plate from the factory during welding.
Stainless steel tailpipes with 89mm round angle cut exits.
Lightweight Version, 1Kg lighter than standard.
Normal list $508, they are on special for $99 so let me know if you would like to check them out.
Bryan
Hope all is well - we don't have any more of our RSS Black Tips on special.
I do have 3 sets of the larger angle cut tips in polished stainless steel. These are Cargraphic brand from Germany. Normal retail on them is over $500 but they have been on the shelf for some time and need to be polished, brushed or they can even be high heat painted or ceramic coated if desired due to some slight discoloration near the base plate from the factory during welding.
Stainless steel tailpipes with 89mm round angle cut exits.
Lightweight Version, 1Kg lighter than standard.
Normal list $508, they are on special for $99 so let me know if you would like to check them out.
Bryan
Registered User
Joined: Oct 2011
Posts: 369
From: SoCal
Rep Power: 31
Hey Bryan, still a good deal... do you have any idea on cost for a local shop to ceramic coat or powder coat these a flat black?
I have fabspeed tips now which are really nice, look great, but not light weigh at least 2lbs more than oem. I want light. But not $500/lb light! :-)
I have fabspeed tips now which are really nice, look great, but not light weigh at least 2lbs more than oem. I want light. But not $500/lb light! :-)
spyerx,
Hope all is well - we don't have any more of our RSS Black Tips on special.
I do have 3 sets of the larger angle cut tips in polished stainless steel. These are Cargraphic brand from Germany. Normal retail on them is over $500 but they have been on the shelf for some time and need to be polished, brushed or they can even be high heat painted or ceramic coated if desired due to some slight discoloration near the base plate from the factory during welding.
Stainless steel tailpipes with 89mm round angle cut exits.
Lightweight Version, 1Kg lighter than standard.
Normal list $508, they are on special for $99 so let me know if you would like to check them out.
Bryan
Hope all is well - we don't have any more of our RSS Black Tips on special.
I do have 3 sets of the larger angle cut tips in polished stainless steel. These are Cargraphic brand from Germany. Normal retail on them is over $500 but they have been on the shelf for some time and need to be polished, brushed or they can even be high heat painted or ceramic coated if desired due to some slight discoloration near the base plate from the factory during welding.
Stainless steel tailpipes with 89mm round angle cut exits.
Lightweight Version, 1Kg lighter than standard.
Normal list $508, they are on special for $99 so let me know if you would like to check them out.
Bryan
Thread Starter
|
Former Vendor
Joined: Mar 2009
Posts: 1,052
From: Costa Mesa, California
Rep Power: 0
Feel free to give me a call at the factory if you prefer 714.545.1046.
I would love to spray them for you but we are a bit tied up currently with producing our products.
Shouldn't be much $ for light prep and ceramic coating. I wouldn't be afraid of surface prepping and spraying them myself with some high heat paint or enamel if you like small projects. You would be amazed at what a can of BBQ paint and some patience will provide...
Give me a buzz if you would like to discuss.
B
I would love to spray them for you but we are a bit tied up currently with producing our products.
Shouldn't be much $ for light prep and ceramic coating. I wouldn't be afraid of surface prepping and spraying them myself with some high heat paint or enamel if you like small projects. You would be amazed at what a can of BBQ paint and some patience will provide...
Give me a buzz if you would like to discuss.
B
Thread
Thread Starter
Forum
Replies
Last Post
joseph_number1
Automotive Parts & Accessories For Sale/Wanted
12
Jul 19, 2018 05:45 PM
RS GT3 RS
Automotive Parts & Accessories For Sale/Wanted
3
Sep 24, 2015 09:27 PM