Category: Accessories
Price: $500
Private or Vendor Listing: Private Listing
Part fits: Porsche 911 997 Turbo, Porsche 911 996 Turbo
Location (State): WI
Item Condition: Used

Looking to purchase new or used 996 turbo cam timing tool, PM me with what you have and the price, thank you.

 

rarely if ever see them for sale. baum tools would be the cheapest need left and right side cam plates and intake and exhaust cam lock down tools. about 2000$

 

You can get a Stomski dial indicator type for 800 and just use a 360 degree wheel on the crank pulley. It is best to find a shop that has them and just pay them to do it. It is a quick job.

 

I may do more motors, I have a cnc program to port heads to make it extremely affordable now.

I was just seeing if someone if the tool and would not need it any more.

 

still need the cam locking tools for the nuts on the front of the cams. 2 different size tools

 

No you just set it and tighten it no big deal.

 

Talk to Sean at SRM, he may have built his own as I know he built several of his own tools.

 

the intake cam gets a set ft/lb plus 170* and the exhaust cam gets a set ft/lb and 90*. the tools are needed to hold the cam in place and not move while another person cranks the snot out of the bolt.the intake cam has to be held at the outmost counterclockwise position when torquing the bolt. this is why the tools have **** on the end to lock into the cams themselves.

he has made the locking tools but uses baum cam plates

these tools have 2 different size diameters for intake and exhaust http://www.baumtools.com/shop/01engi...l#.WOt7lFKZNE4
http://www.baumtools.com/shop/01engi...l#.WOt6X1KZNE4

http://www.baumtools.com/shop/01engi...l#.WOt69VKZNE4
http://www.baumtools.com/shop/01engi...l#.WOt7U1KZNE4

 

I just used an end wrench on the notched part of the cam.

 

that only works if the notch is in the correct position. if you allow the cam to move especially the intake cam you change the vario cam timing. having had to do this 3 times to get the timing right its not an easy task to backyard it. better to have the proper tools from the start

 

There is tons of room for the wrench to move wherever.

 

Still looking!

 

Still looking to buy a set of 996 turbo cam timing tools!!