a/c control relocation.
I'm looking to put a ddin radio in my 04 boxster. I will need to relocate the a/c controls to do this. Any kits available?
|
The a/c control in my '01 is down at the bottom of the stack, just in front of the shifter. I would like to move the climate control up to the spot above the radio which is currently occupied by the cupholders. So if you have the proper bezel for the a/c control to be up there, and I have the proper bezel for it to be down in the angled portion of the console, maybe we can just swap bezels? I don't know.... I'll look for pics of the 04 setup to see what might be different. Also, the hardware in the back may also be different.
|
I can trade you trim panels. Mine was up top above radio below cup holders.
|
They come in several different locations depending on your options. You may not need a kit of any kind. Just move it up or down to allow your double din installation. You can certainly have the installation business move it at that time.
|
Originally Posted by hitman986
(Post 3323514)
I can trade you trim panels. Mine was up top above radio below cup holders.
|
I just took out the climate control unit and cupholders and both bezels. The climate control bezel is shown below. It is ~63 mm tall and has angled sides, so it would have to be in the bottom spot on the center console. In addition, to make your a/c unit work in the bottom angled spot, you might have to cut off the plastic screw ears on the bottom of the unit (on mine, only 2 screws, not 4, hold it in place along with some clips near the back).
My cupholder bezel is 70 mm, so if your a/c bezel is that high, then I think it will work for me. The thing at the top of the pic is from the cupholders, but I'm pretty sure it's not useable for the a/c unit because the a/c unit is secured in a different way. https://www.6speedonline.com/forums/...ictureid=20849 |
Looking at more pics, if you have the cupholders that are are in the slot with the a/c vents that is about 1/2" high, then I think your bezel will work for me. I was thinking that you had the older cupholder cassette like mine that occupies a full DIN slot.
|
All times are GMT -6. The time now is 08:49 AM. |
© 2024 MH Sub I, LLC dba Internet Brands