Hey guys , I'm on the 6speedmobile app and I can't find a DIY for the clear corners ,, only access is they the wheel well imma assume ,, thanks in advance ...

 

Did you buy your lenses yet?

 

Simple job but time consuming (the top bolt is crazy hard to get too). Take off the wheel well liner, no need to take off the tires, just turn them inward on the side you are working on.

Two torque screws hold in the light. The bottom is easy to get out, the top is hard only because there is limited space. You need a wrench with a troque drive end to make this simple. A flex driver may work but I used the wrench.

Once you get the light off, I found it easiest to screw in the top screw to hand tight, then use the wrench. Just be patient. I think there is a write up over on rennlist or renntech.

 

I don't think you need to remove the liners completely - just enough to bend them back a bit to get to the lights...

 

Correct. I just removed to the middle and pulled back.