Headlight upgrade - Help needed !
#1
Headlight upgrade - Help needed !
Hi everyone, Im planning to upgrade factory halogen bulbs on my 11 cayenne S.
Looking at these HiD bulbs from http://www.kbcarstuff.com/H7-Xtreme-...ts-p/xt-h7.htm
But im not sure if this will give me warnings or any programming is needed ?
Any helps is appreciated!
Looking at these HiD bulbs from http://www.kbcarstuff.com/H7-Xtreme-...ts-p/xt-h7.htm
But im not sure if this will give me warnings or any programming is needed ?
Any helps is appreciated!
#4
Hi Airbus Driver,
Hi had installed a set of H7 Morimoto XB35 kit on my cayenne without any error code or flickering problem. The kit comes with separate canbus unit which will cancel out any error.
Don't forget you need a set of retaining clip for the setup! I bought mine from eBay, but I have to modified it abit to make it fit.
Good luck, if you have any question do drop me a message.
Hi had installed a set of H7 Morimoto XB35 kit on my cayenne without any error code or flickering problem. The kit comes with separate canbus unit which will cancel out any error.
Don't forget you need a set of retaining clip for the setup! I bought mine from eBay, but I have to modified it abit to make it fit.
Good luck, if you have any question do drop me a message.
#7
Do you have factory xenon? If you do then yes it is D1S, if not it is H7 on low and high beam. The clip is for H7 bulbs not for D2S, you do not need the clip for factory xenon unit.
Trending Topics
#9
Hi Airbus Driver,
Hi had installed a set of H7 Morimoto XB35 kit on my cayenne without any error code or flickering problem. The kit comes with separate canbus unit which will cancel out any error.
Don't forget you need a set of retaining clip for the setup! I bought mine from eBay, but I have to modified it abit to make it fit.
Good luck, if you have any question do drop me a message.
Hi had installed a set of H7 Morimoto XB35 kit on my cayenne without any error code or flickering problem. The kit comes with separate canbus unit which will cancel out any error.
Don't forget you need a set of retaining clip for the setup! I bought mine from eBay, but I have to modified it abit to make it fit.
Good luck, if you have any question do drop me a message.
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
Mercedes/AMG Vendor Classifieds
0
08-21-2015 01:37 PM
PelicanParts.com
Audi Vendor Classifieds
0
08-21-2015 01:28 PM
Fadi
Automotive Parts & Accessories For Sale/Wanted
0
08-21-2015 03:43 AM