2002 911 Turbo Speed Yellow Dripping Wet /Swissvax Zuffenhausen
Thread Starter
|
Former Vendor
Joined: Aug 2005
Posts: 2,888
From: New Jersey
Rep Power: 0
2002 911 Turbo Speed Yellow Dripping Wet /Swissvax Zuffenhausen
This was a treat a 2002 Speed Yellow Turbo with 1200 miles on it, no before pictures couldn't get any shots that showed any real imperfections (due to the overcast and lighting) This P car was treated with Swissvax Zuffenhausen, it gave the car some nice depth/wetness/ and shine...this car looks hot!!!!
Procedure:
1. Rinsed down the wheels (they were cool enough to touch)
2. Sprayed down the wheels with some P21S Wheel Cleaner
3. Brush and cleaned the wheels with a Boar's Hair Brush
4. Rinsed down the wheels
5. Rinse the car down
6. Used the foamgun (Adam's Car Wash) to apply soap, let it sit and then
7. Used the Shmitt to wash the car, from top to hood to sides to rear.
8. Rinse car off throughly
9. Since there was no sun out and it was cool, I sprayed Adam's Detail Spray on the panels and proceeded to clay the car (Adam's Clay Bar) after each panel and each window was clayed I used the WW Drying Towel to wipe the excess detail spray off.
10. Car is clayed and dried.
11. Used the Metabo with the Menzerna 106ff to polish out all the minor imperfections. (blue pad)
12. After each section was corrected I buffed off the excess polish with a MF Buffing Towel.
13. Applied Swissvax Cleaner Fluid and removed with MF Towel
14. Applied Swissvax Zuffenhausen (Porsche/German specific wax made by Swissvax) by hand and let sit for about 10-13 minutes, buffed off to a nice wet and deep shine with a MF Towel
15. Cleaned up the windows with Adam's Glass Cleaner (interior/exterior)
16. Dressed the tires with Adam's VRT (did one pass on the applicator and did a pass using the dry side as the customer prefers a matte finish)
17. Used Adam's Detail Spray to do a final wipe down on the wheels.
18. Used the 1Z Detail Spray for a final wipe down and inspected the car.
Hot shots:
Procedure:
1. Rinsed down the wheels (they were cool enough to touch)
2. Sprayed down the wheels with some P21S Wheel Cleaner
3. Brush and cleaned the wheels with a Boar's Hair Brush
4. Rinsed down the wheels
5. Rinse the car down
6. Used the foamgun (Adam's Car Wash) to apply soap, let it sit and then
7. Used the Shmitt to wash the car, from top to hood to sides to rear.
8. Rinse car off throughly
9. Since there was no sun out and it was cool, I sprayed Adam's Detail Spray on the panels and proceeded to clay the car (Adam's Clay Bar) after each panel and each window was clayed I used the WW Drying Towel to wipe the excess detail spray off.
10. Car is clayed and dried.
11. Used the Metabo with the Menzerna 106ff to polish out all the minor imperfections. (blue pad)
12. After each section was corrected I buffed off the excess polish with a MF Buffing Towel.
13. Applied Swissvax Cleaner Fluid and removed with MF Towel
14. Applied Swissvax Zuffenhausen (Porsche/German specific wax made by Swissvax) by hand and let sit for about 10-13 minutes, buffed off to a nice wet and deep shine with a MF Towel
15. Cleaned up the windows with Adam's Glass Cleaner (interior/exterior)
16. Dressed the tires with Adam's VRT (did one pass on the applicator and did a pass using the dry side as the customer prefers a matte finish)
17. Used Adam's Detail Spray to do a final wipe down on the wheels.
18. Used the 1Z Detail Spray for a final wipe down and inspected the car.
Hot shots:
,but nothing beats swissvax
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
AJUSA.com
997 Vendor Classifieds
4
Oct 8, 2015 05:50 PM
SharkyShark20
Automobiles For Sale
4
Sep 19, 2015 09:54 PM
PelicanParts.com
991 Vendor Classifieds
2
Aug 20, 2015 04:53 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
Aug 20, 2015 02:37 PM
PelicanParts.com
991 Turbo Vendor Classifieds
0
Aug 20, 2015 02:27 PM
