I tried to search for information on this, but could not find anything.
How is this wing adjusted and is there some type of chart out there that shows what type of downforce is generated at the different pitches?

Thanks

 

It is realtively easy. There is a screw in the top of the palsic insert that you remove than the insert becomes removable. Underneath there is a large bolt to loosen. Lossen both sides at the same time , adjust the wing and reinstallthe inserts. As I remember, there is also a screw at the bottom that looks like it needs to be removed but actually doesn't. The one thing to watch out for is that it is VERY easy to drop the screw on he reinstall in which case you have to remove the plastic cover holding the fan and the screw is usually hiding in the very quarter of the body panel.

Good luck.

 

Anyone know the torque spec on the screws?

I would rather that the wing stays on my car at say, Button Willow...

 

very good question... if im not mistaken, i believe there are 3 pitch setttings for the stock wing. ANyone got pics of the wing in all 3 positions? thanks!!!!

 

https://www.6speedonline.com/forums/...ghlight=adjust