Anyone know what the part #s are for the lift adapter plates for CGT?

The workshop manual describes them alternately as "mounting plates" and "jacking plates". From the diagram they appear different front and rear.

 

You can find all CGT part numbers here

https://techinfo.porsche.com/techinf...SA_KATALOG.pdf

 

SunCoast stocks them and has a photo of them under CGT on their web site. About $400 as I recall.

 

Nope, not tools. For example, the torque multiplier (for tightening the wheels) is not there either.

 

Yup:
GT Lift Plate Kit - $469.90

 

cool, thanks!

000 721 9482 0 vehicle lift kit $469.90

damn that's expensive ... i will see if hockey pucks will just do the trick.

 

Steve, do you know if there is a factory 6 pt harness hardware kit available?

 

Haha, with these cars' reputation for falling off lifts when the plates and straps aren't used, I hope that's a joke!

 

The plates are 000 721 948 20
and also the eyelets and ratchetstraps that go with it are 000 721 945 40
I also hope the hockey pucks are a joke, if you have never lifted one, you can lift the front of the car off the hoist with just two fingers, so not only strap it down, put some sandbags in the front of the car also.

 

ok thanks, i will make sure to get the plates and straps!

 

Oh, I'm sorry I didn't see your post regarding the harness kit. I honestly don't know what the part number is for that, so I emailed PCNA and they did not have a part number for me either.

I have heard that they are available from *cough*Carnewal*cough*.

 

Hi Steve, I included the part number for the straps in my above post.

 

Ohh, I thought mousecatcher was referring to the 6-point harnesses for his seats. I can get the lift securing straps no problem, they're only $50-60.

 

Steve, you read correctly, I was referring to the seat harnesses.

But as for the lift securing straps, are they $60 ea or $60 for 4?

 

You really only need two, one for each forward hoist/lift arm.