Panamera Turbo 700hp + Project
2 Attachment(s)
Here is a dyno graph of my Panamera turbo on a Mustang Dyno with Sport Plus mode activated.
The car ECU is stock and waiting for remap this days. The mods i have is: Upgraded Turbochargers, Sport Exhaust with straight pipes, Billet diverter valves, BMC air filter, custom made high flow y-pipe and Pulstar pulse plugs. |
Look forward to reading more about this. Post some pictures of this beast when you get a chance.
|
Ok i will... :)
|
2 Attachment(s)
It seems my PDK is broken or it is not designed to hold that much torque... :(
|
Interesting, so if I am reading this correct you have over 800FT/LBS of torque at the wheels but only just over 500whp at the wheels? Any idea why you there is such a disparity? I just find it odd that there is that much of a difference, usually on these cars HP and TRQ are pretty close.
Sad to hear about the PDK, was hoping it might be a bit more durable than this. Do you happen to have a dyno run sheet that has a line that shows the boost pressure held at each RPM? That would be very helpful. I plan on implementing similar upgrades sometime later this year so I am very interested in whatever information you have to share. Thanks, Jeff |
Originally Posted by jaatlee
(Post 4027147)
Interesting, so if I am reading this correct you have over 800FT/LBS of torque at the wheels but only just over 500whp at the wheels? Any idea why you there is such a disparity? I just find it odd that there is that much of a difference, usually on these cars HP and TRQ are pretty close. Sad to hear about the PDK, was hoping it might be a bit more durable than this. Do you happen to have a dyno run sheet that has a line that shows the boost pressure held at each RPM? That would be very helpful. I plan on implementing similar upgrades sometime later this year so I am very interested in whatever information you have to share. Thanks, Jeff
|
I have heard that the PDK in the Panamera is having a hard time holding that much torque. This is around the same hp/tq levels I am at in my CTTS (approx 600 awhp; same engine) with no issues for over a year and a clean dyno chart. However, we have an automatic Aisin TR60SN transmission.
Without knowing for sure, this does look like clutches slipping.. I would suggest dropping into the 991 911 section and see if any tuners have any experience strengthening the PDK clutches. |
Originally Posted by Renaissance.Man
(Post 4027420)
I have heard that the PDK in the Panamera is having a hard time holding that much torque. This is around the same hp/tq levels I am at in my CTTS (approx 600 awhp; same engine) with no issues for over a year and a clean dyno chart. However, we have an automatic Aisin TR60SN transmission. Without knowing for sure, this does look like clutches slipping.. I would suggest dropping into the 991 911 section and see if any tuners have any experience strengthening the PDK clutches.
|
Originally Posted by iglambo
(Post 4027431)
600 AWHP, at what dyno did you get that numbers?
Here is the dyno: https://www.6speedonline.com/forums/...ine=1389988897 |
Originally Posted by Renaissance.Man
(Post 4027432)
I said approx 600awhp. This dyno chart is a little outdated at 582 ft lbs tq. Since then I have added methanol injection, full 3" exhaust, and currently working on a bigger y-pipe intake. These three should have me closer to the 600 awhp number once I can get it redynoed. Here is the dyno:
|
we have done same project here before.
turbo S upgraded turbos bmc filter downpipe full exhaust car 70-250kmh was ahead by 8 cars from stock panamerat turbo |
Originally Posted by cayenne_ksa
(Post 4027445)
we have done same project here before. turbo S upgraded turbos bmc filter downpipe full exhaust car 70-250kmh was ahead by 8 cars from stock panamerat turbo Video Link: http://www.youtube.com/watch?v=BI6XuTO3fXU
|
Originally Posted by iglambo
(Post 4027447)
Did you have transmission slipping like me?
|
Originally Posted by cayenne_ksa
(Post 4027448)
the car has been running for almost 2 yrs now with no issues
|
Originally Posted by iglambo
(Post 4027450)
What torque you had to the wheels?
|
All times are GMT -6. The time now is 06:50 PM. |
© 2024 MH Sub I, LLC dba Internet Brands