Panamera The 4-dour coupe by Porsche

whee/tire fitment advice

Old Apr 9, 2020 | 04:05 PM
  #1  
bongsta329's Avatar
Thread Starter
|
Registered User
Joined: Apr 2019
Posts: 7
From: SF Bay Area California
Rep Power: 0
bongsta329 is infamous around these parts
whee/tire fitment advice

Hello Forum,

I wanted to get an idea if the following wheels/tires would fit my 2014 PSEH. More concerned about the offset on the front wheel. Here are the wheel/tire specs:

20 x9.5 x 71mm ET
20x11.5 x 68mm ET

Tires: Michelin
Pilot sport A/S3
275/ 40 r20
315/ 35 r20

Appreciate any feedback.

Thanks,
bongsta
 
Old Apr 9, 2020 | 07:50 PM
  #2  
12PTTSGrey's Avatar
Registered User
Joined: Sep 2018
Posts: 79
From: Savage, MN
Rep Power: 11
12PTTSGrey is infamous around these parts
The offset for the stock 20 inch front wheel is 65mm and the rear is 68mm so this will be pulled in a bit much versus the stock fitment. You could just add a wheel spacer up front, say a 7 mm to keep the stock offset look and clear the brakes. If you need more clearance, depending on the wheel style, you could do a 15 mm up front and out back. You will likely have to test fit the wheels for clearance.
 
Old Apr 9, 2020 | 11:49 PM
  #3  
bongsta329's Avatar
Thread Starter
|
Registered User
Joined: Apr 2019
Posts: 7
From: SF Bay Area California
Rep Power: 0
bongsta329 is infamous around these parts
12PTTSGrey

Thanks for the reply. I guess I'll have to look into spacers. =)

Thanks,
bongsta
 
Old Apr 10, 2020 | 10:59 AM
  #4  
12PTTSGrey's Avatar
Registered User
Joined: Sep 2018
Posts: 79
From: Savage, MN
Rep Power: 11
12PTTSGrey is infamous around these parts
Use spacers on the front and rear. Since I had the 7 mm already out back, I used those up front (I have 265/30-20) and a 15 mm out back on the stock Turbo II wheels.


 
Old Apr 10, 2020 | 12:24 PM
  #5  
bongsta329's Avatar
Thread Starter
|
Registered User
Joined: Apr 2019
Posts: 7
From: SF Bay Area California
Rep Power: 0
bongsta329 is infamous around these parts
12PTTSGrey,

Beautiful car! Any issues with handling with spacers installed? Also, did you have to use longer wheel bolts?

Thanks,
bongsta
 
Old Apr 10, 2020 | 05:41 PM
  #6  
12PTTSGrey's Avatar
Registered User
Joined: Sep 2018
Posts: 79
From: Savage, MN
Rep Power: 11
12PTTSGrey is infamous around these parts
Thanks, it is a fun car. No issues with the spacers. Just need to make sure they are a good quality. I did get longer wheel bolts for the back with the 15 mm spacers. I forget the stock specs but if I recall, I used 43mm bolts.
 

Last edited by 12PTTSGrey; Apr 10, 2020 at 05:50 PM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott in Cincy
Automobiles For Sale
14
Aug 23, 2021 11:59 AM
slverblk996tt
Automobiles For Sale
4
Feb 7, 2020 02:31 PM
kylemorioka
Automobiles For Sale
4
Oct 24, 2019 10:24 PM
mlandingin177
Automotive Parts & Accessories For Sale/Wanted
3
Aug 21, 2019 06:17 PM
Torque-less
Automobiles For Sale
5
Apr 4, 2019 05:26 PM


Thread Tools
Rate This Thread
Rate This Thread:
You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -6. The time now is 11:39 PM.