When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I don't know why you guys continue to encourage non sponsors to sell a product here without suggesting they become a sponsor....I just can't let that happen...look for him on Rennlist
Rennlist used to be totally member supported and there were no ads...this site was ad free as well...those were the days...I don't know what RL's current policy is or whether engineer is a sponsor there....when I go there they seem to have members and sponsors posting ads all over the place
Rennlist used to be totally member supported and there were no ads...this site was ad free as well...those were the days...I don't know what RL's current policy is or whether engineer is a sponsor there....when I go there they seem to have members and sponsors posting ads all over the place
they are owned by i/b as well so i would think the rules are the same.dot know whether the moderators enforce it, seems a bit lax
I just drilled some small holes near where the mounting holes were and used small black zip ties to secure them to the car. Works well!
Originally Posted by JimTT
Not a bad idea, its probably better than using screws. Zip ties shouldn't have as much pressure as there is a bit of flex, so less likely to have new cracks on new holes.
Thanks for the idea, probably not to everyone's liking but I did mine and these babies aren't going anywhere.
I sent your issue info to IB and they confessed they had messed up the permissions on your account...you should be ok now...but if you still can't start a new thread in the vendor area please call your account rep and get them to fix it while you are online....unfortunately, it is not something I can fix for you...get them to give you a credit....1-888-879-0146
I am told that all your permissions and user group have been checked and verified multiple times...you must be trying to start a thread outside of your user group
Here's my ghetto method I made these tabs just for the bottom attachment point of my taillights (my tops are still intact) that grab and use pressure to keep the housing down. Not the prettiest, but they are hard to notice and I don't have to worry about the light falling out. I went over them with a black paint pen so they don't stick out so bad. This summer, I'll do it right with some fiberglass/resin repair.
I made these tabs just for the bottom attachment point of my taillights (my tops are still intact) that grab and use pressure to keep the housing down. Not the prettiest, but they are hard to notice and I don't have to worry about the light falling out. I went over them with a black paint pen so they don't stick out so bad. This summer, I'll do it right with some fiberglass/resin repair. 
