When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
So I purchased a Carbon fiber version of this part and can't figure out how to remove it.... The new part looks like it should just pull right out from the door panel. I have tried multiple ways of prying/pulling and have gotten nowhere except slightly scratching the leather around the emblem and damaging the current emblem......... Anyone have any idea how to get this part out? what am I missing..?
The small plastic pin you see on the rear side is melted from OEM side to the door panel. You need to drill them out..
As you anyway destroy the OEM badges you´ll not have to remove the door panels for that job.
Place an standard wood drill in the correct size in center of your OEM badge and go ahead carefully.
When you´re deep enough you´ll be able to take it off and put in place your new ones (would recommend to fix with a drop of glue).
The small plastic pin you see on the rear side is melted from OEM side to the door panel. You need to drill them out..
As you anyway destroy the OEM badges you´ll not have to remove the door panels for that job.
Place an standard wood drill in the correct size in center of your OEM badge and go ahead carefully.
When you´re deep enough you´ll be able to take it off and put in place your new ones (would recommend to fix with a drop of glue).
Enjoy to give your door panels the final details.
Thank you... Can you provide instructions for how to install other items as well that I got from you?
can you adivise how how to install Product no.: 135G2-0001 & Product no.: 1312G2-0001
Hi,
no prob, the belt trims are clipsed in place only. Use an plastic interior tool to push them off.. Exterior mirrors are a bit more complicated, please check PM for details.
"Airbag" Door emblem removal
Anyone have any idea how to get this part out? what am I missing..?
