Looking for some feedback on wheel choices
#1
Looking for some feedback on wheel choices
I'm new here on the forums. Although, Iv been a lurker for a while now. Iv been searching around for awhile on what type of wheels to put on the car. I dont have any pictures of the car but it is a completely stock Polar Silver 2003 996 Turbo Coupe. I bent a wheel on a pothole so iv decided that i need to pull the trigger on a new set. Iv narrowed my search down to these wheels. Could someone enlighten me on the differences of these two wheels? Iv been looking at lots of pictures and I cant tell the differences. The only thing that i can see a difference in is the price. If i were to go with the HRE's am i just paying for the name? or is the wheel a more quality made wheel? Im looking for a wheel I can use on the street and track.
Thanks
HRE S95R
Iforged Aero
Thanks
HRE S95R
Iforged Aero
#3
Hre all the way! My opinion first off other than quality and finish..Hre has way better customer service than Iforged...I own a shop and known 3 customers to have had bad experiences with I forged..not to mention wrong offset...extended time and I even have a friend with that same wheel with one of the spokes CRACKED in half! (it did not crack due to accident on street he was at the track..thats it)
#6
If you want first class customer service and quality, but willing to spend the money, go with HRE. If you arent looking to spend the money and dont care so much about customer service and possible quality/fitment issues, go with iForged. Not bashing them, but when a custom 3 piece wheel is made for your car and Vince @ iForged says you also need a spacer, there is a problem.
#7
I See You Searching For Wheel But I Would Go With The Another Forged Brand!
Last edited by E55BENZAMG; 04-08-2008 at 07:49 AM.
Trending Topics
#9
#10
#13
The Aero's actually look more like the 545R now since they have a pushed in center hub.
Here's a more recent picture of the iForged Aero:
See how it dips in the middle more? Compared to the image you posted?
You might want to also consider the DPE ST5
Here's a shot of it:
All pictures complementary of ElusiveFx.com
Here's a more recent picture of the iForged Aero:
See how it dips in the middle more? Compared to the image you posted?
You might want to also consider the DPE ST5
Here's a shot of it:
All pictures complementary of ElusiveFx.com