6SpeedOnline - Porsche Forum and Luxury Car Resource
Share Your Pictures with Our Community. Upload Now
0 2017/01/30 21:03:12
0 2017/01/30 20:28:46
0 2017/01/30 20:28:43
0 2017/01/30 20:28:42
0 2017/01/30 20:28:41
and DONE. Engine removed
and DONE. Engine removed
0 2017/01/30 19:33:24
Almost
Almost
0 2017/01/30 19:32:31
Little further
Little further
0 2017/01/30 19:31:56
Starting to lift the body VERY carefully, making sure nothing is still connected or obstructed
Starting to lift the body VERY carefully, making sure nothing is still connected or obstructed
0 2017/01/30 19:30:39
They have this little springy thing, you have to insert a srew driver into the tab opening and turn. The spring does not have to move much to be able to remove the pipess
They have this little springy thing, you have to insert a srew driver into the tab opening and turn. The spring does not have to move much to be able to remove the pipess
0 2017/01/30 19:26:25
Air induction pipes
Air induction pipes
0 2017/01/30 19:26:15
And here the engine
And here the engine
0 2017/01/30 19:23:49
Advertisement
Here is how I am supporting the transmission
Here is how I am supporting the transmission
0 2017/01/30 19:23:03
Ouch, discovered bad CV joint boot. Luckily, I was only $20 to replace
Ouch, discovered bad CV joint boot. Luckily, I was only $20 to replace
0 2017/01/30 19:21:35
Now to removing the front suspension. I opted to keep the airshocks still connected to the engine. Removing the top shock tower, steering rack, and brake calipers. Do not disconnect the hoses to the calipers, just hang the attached to the body using coat hangers
Now to removing the front suspension. I opted to keep the airshocks still connected to the engine. Removing the top shock tower, steering rack, and brake calipers. Do not disconnect the hoses to the calipers, just hang the attached to the body using coat hangers
0 2017/01/30 19:19:12
Here is how I keep all my screws and bolts organized
Here is how I keep all my screws and bolts organized
0 2017/01/30 19:17:49
Exhaust removed
Exhaust removed
0 2017/01/30 19:17:00
Removing the midsection exhaust
Removing the midsection exhaust
0 2017/01/30 19:16:24
Main wire loom removed
Main wire loom removed
0 2017/01/30 19:15:16
Remove the plastic cover right below the windshield to expose and disconnect all electrical connectors going to the engine. Oh, I forgot to mention, before I started, I disconnected both negative cables to my batteries.
Remove the plastic cover right below the windshield to expose and disconnect all electrical connectors going to the engine. Oh, I forgot to mention, before I started, I disconnected both negative cables to my batteries.
0 2017/01/30 19:11:47
After removing the radiator assembly, you may find you need to replace the serpentine belt like mine here in the picture
After removing the radiator assembly, you may find you need to replace the serpentine belt like mine here in the picture
0 2017/01/30 19:09:46
Then remove the radiator assembly. Here, you have to be careful disconnecting all systems, including electrical. Before starting, evacuate the AC, drain coolant, empty power steering
Then remove the radiator assembly. Here, you have to be careful disconnecting all systems, including electrical. Before starting, evacuate the AC, drain coolant, empty power steering
0 2017/01/30 19:06:41
First and easiest step to remove the bumper cover and wheel wells
First and easiest step to remove the bumper cover and wheel wells
0 2017/01/30 19:04:45
Lift installed and ready to start disassembling
Lift installed and ready to start disassembling
0 2017/01/30 19:01:45
0 2017/01/30 18:32:31
0 2017/01/30 18:32:17
0 2017/01/30 18:32:16
0 2017/01/30 18:32:16
0 2017/01/30 18:32:15
0 2017/01/30 18:32:14
0 2017/01/30 18:32:14
0 2017/01/30 18:32:13
Advertisement