6SpeedOnline - Porsche Forum and Luxury Car Resource
0 2018/10/28 19:45:59
0 2018/10/28 19:46:43
0 2018/10/28 19:46:43
0 2018/10/28 19:46:44
0 2018/10/28 19:47:05
0 2018/11/22 16:24:43
Pentosin reservoir
Pentosin reservoir
0 2019/02/02 09:55:36
0 2019/02/02 09:55:37
0 2019/04/13 17:27:08
0 2019/04/13 17:27:28
0 2019/04/13 17:27:43
0 2019/04/13 17:28:45
0 2019/04/13 17:29:02
0 2019/04/13 17:29:19
0 2019/04/17 21:55:07
0 2019/04/17 21:55:08
0 2019/04/17 21:55:10
0 2019/04/17 21:55:12
0 2019/04/27 01:32:14
0 2019/04/27 01:45:16
0 2019/11/06 19:20:13
0 2019/11/07 19:36:36
0 2019/11/07 19:42:16
0 2019/11/10 19:45:07
Dogwood about to be sucked into my air intakes
Dogwood about to be sucked into my air intakes
0 2019/11/10 19:46:02
0 2019/11/10 19:46:39
From shop manual
From shop manual
0 2019/11/14 16:13:07
Live, from my shop
Live, from my shop
0 2019/11/14 16:13:24
Here you can see have the brace holds the bushings and sway bar in place
Here you can see have the brace holds the bushings and sway bar in place
0 2019/11/14 16:14:10
Started with the suspension work, kept the car low on the lift
Started with the suspension work, kept the car low on the lift
0 2019/11/26 22:36:17
Supporting the wheel carrier as the upper control arm is being replaced
Supporting the wheel carrier as the upper control arm is being replaced
0 2019/11/26 22:37:14
Upper control arm installed
Upper control arm installed
0 2019/11/26 22:38:15
Pressing in lower forward bushing.
Pressing in lower forward bushing.
0 2019/11/26 22:39:03
Swaybar
Swaybar
0 2019/11/26 22:41:15
Some of my new favorite tools : Mityvac and Endoscopic cam, lifesavers for this project
Some of my new favorite tools : Mityvac and Endoscopic cam, lifesavers for this project
0 2019/11/26 22:42:45
Next we raise the car higher to take care of the fluids. Since I was not familiar with the lift I put two 2 ton hoists under the car. Might not be necessary , but one never knows :)
Next we raise the car higher to take care of the fluids. Since I was not familiar with the lift I put two 2 ton hoists under the car. Might not be necessary , but one never knows :)
0 2019/11/26 22:44:01
Earlier this evening I was able to lower the car
Earlier this evening I was able to lower the car
0 2019/11/26 22:46:27
Earlier this evening I was able to lower the car. I had to keep it supported by the lift since the 2 front airstruts needed to be filled by the on-board compressor.
Earlier this evening I was able to lower the car. I had to keep it supported by the lift since the 2 front airstruts needed to be filled by the on-board compressor.
0 2019/11/26 22:47:08
The car threw an error associated with the suspension, but after a while (as the airstruts were filled) it went away.
The car threw an error associated with the suspension, but after a while (as the airstruts were filled) it went away.
0 2019/11/26 22:48:25
0 2019/12/06 21:27:59