panda997's Photos

View Profile

0 2017/01/19 16:14:44 panda997

Finished product

Finished product

0 2017/01/14 22:36:38 panda997

One T 10 at the bottom and use Allen wrench to loosen the center it was a 4 mm

One T 10 at the bottom and use Allen wrench to loosen the center it was a 4 mm

0 2017/01/14 22:36:34 panda997

These are t10 I had to go and buy a set at the hardware store to access as my drill bit ones were too short

These are t10 I had to go and buy a set at the hardware store to access as my drill bit ones were too short

0 2017/01/14 22:36:26 panda997

0 2017/01/14 22:36:23 panda997

0 2017/01/14 22:36:19 panda997

Left side then just pops off

Left side then just pops off

0 2017/01/14 22:36:15 panda997

0 2017/01/14 22:36:12 panda997

0 2017/01/14 22:36:08 panda997

Clock spring is held in place with clips. Once you unbutton the yellow clip on the back right top corner

Clock spring is held in place with clips. Once you unbutton the yellow clip on the back right top corner

0 2017/01/14 22:36:05 panda997

Once you open it you can slide the entire thing out to get to the back

Once you open it you can slide the entire thing out to get to the back

0 2017/01/14 22:35:59 panda997

Taking apart the cover it just comes apart. I used a small flat head screwdriver and worked from the inside of the center left and right to open

Taking apart the cover it just comes apart. I used a small flat head screwdriver and worked from the inside of the center left and right to open

0 2017/01/14 22:35:52 panda997

Everything just comes apart at this point remove the clips and plug and play

Everything just comes apart at this point remove the clips and plug and play

0 2017/01/14 22:35:47 panda997

Be careful on the bottom there is a small clip holding the cover together

Be careful on the bottom there is a small clip holding the cover together

0 2017/01/14 22:35:43 panda997