6SpeedOnline - Porsche Forum and Luxury Car Resource
0 2018/04/18 07:05:42
0 2018/04/16 10:13:34
0 2018/04/16 09:49:26
0 2018/04/16 09:49:25
0 2018/04/16 09:49:24
0 2018/04/16 09:49:23
0 2018/04/16 09:49:22
0 2018/04/16 09:49:21
0 2018/04/16 09:44:51
0 2018/04/16 09:40:12
0 2018/04/16 09:40:11
east fit with a hole punch no adheasive
east fit with a hole punch no adheasive
0 2018/04/16 09:40:11
What great quality
What great quality
0 2018/04/16 09:40:10
0 2018/04/16 09:40:09
These bulge a bit ant the top
These bulge a bit ant the top
0 2018/04/16 09:40:08
From a 2000 996 original filter
From a 2000 996 original filter
0 2018/04/09 09:28:35
From a 2001 999 Turbo
From a 2001 999 Turbo
0 2018/04/09 09:28:34
0 2018/04/07 12:37:13
0 2018/04/05 21:06:10
0 2018/03/20 07:00:50
0 2018/03/20 07:00:49
0 2018/03/08 20:34:14
0 2018/03/08 07:34:34
0 2018/02/14 14:20:27
0 2018/02/13 08:38:34
0 2018/02/13 07:43:52
0 2018/02/02 11:34:05
0 2018/02/02 11:33:09
0 2018/01/24 06:43:11
New Porsche fluid. Could get the pump to drain the bottle so I used a syringe to get the rest of the fluid in.
New Porsche fluid. Could get the pump to drain the bottle so I used a syringe to get the rest of the fluid in.
0 2017/11/20 22:09:10
Ravenol transfer fluid TF-0870 after 2900 miles
Ravenol transfer fluid TF-0870 after 2900 miles
0 2017/11/20 22:09:09
Stock DV
Stock DV
0 2017/11/07 12:41:13
Looks like Porsche is on version 8 now
Looks like Porsche is on version 8 now
0 2017/11/06 11:50:27
Dammed drive coil spring
Dammed drive coil spring
0 2017/11/06 09:07:39
After you put the door panel on drop the drive rod till it clicks, then connect the shade,
After you put the door panel on drop the drive rod till it clicks, then connect the shade,
0 2017/11/06 09:07:39
0 2017/10/30 07:38:43
0 2017/10/30 07:37:38
Again don't open this flat side.
Again don't open this flat side.
0 2017/10/29 09:25:06
Only open the side with the motor or fat side.The side with the arm that goes up in the door is spring loaded. don't ask how I know.
Only open the side with the motor or fat side.The side with the arm that goes up in the door is spring loaded. don't ask how I know.
0 2017/10/29 09:19:01
Pull the metal pin down from the shade with the door panel still on the car. then remove both the plastic tube and pin or drive bar by pulling up. some clamps with plastic pads will help with the leverage and marring.
Pull the metal pin down from the shade with the door panel still on the car. then remove both the plastic tube and pin or drive bar by pulling up. some clamps with plastic pads will help with the leverage and marring.
0 2017/10/29 09:18:59