RT_955TT_KY's Photos

View Profile

On board relays can also fail. Reversing voltage isnsupplied thru CAN HI and CAN LOW. Voltage variances on these two wires along with an error sent via the data wire can trigger a fault.

On board relays can also fail. Reversing voltage isnsupplied thru CAN HI and CAN LOW. Voltage variances on these two wires along with an error sent via the data wire can trigger a fault.

0 2017/01/21 14:04:30 RT_955TT_K

Bent/broken arm can affect magnet positions causing the motor to over or under extend or retract causing a 288 steering column fault.

Bent/broken arm can affect magnet positions causing the motor to over or under extend or retract causing a 288 steering column fault.

0 2017/01/21 14:02:49 RT_955TT_K

White/clear plastic arm slides based on the lock position. Magnets (polar specific) trigger the start/stop via the on board hall sensors.

White/clear plastic arm slides based on the lock position. Magnets (polar specific) trigger the start/stop via the on board hall sensors.

0 2017/01/21 14:01:11 RT_955TT_K

Three hall sensors on the lower right side in this picture.

Three hall sensors on the lower right side in this picture.

0 2017/01/21 13:59:38 RT_955TT_K

0 2015/03/30 18:14:24 RT_955TT_K