New 2 piece splitter for the 996TT
#1
05-16-2014, 11:13 AM
Join Date: Sep 2013
Location: North NJ
Posts: 1,117
Rep Power: 171 
New 2 piece splitter for the 996TT
I'll start with that I'm not affiliated in any way, but I am looking at ordering this lip. Found it on RL, the guys makes them on his own and has done similar for the new Cayman and GT3.
The lip/splitter is 2 pieces, you have the choice of how you want to run it. 3" w/o the splitter attached and 4" w/
John makes these out of his garage, tei@telus.net 604-329-9391
The lip/splitter is 2 pieces, you have the choice of how you want to run it. 3" w/o the splitter attached and 4" w/
John makes these out of his garage, tei@telus.net 604-329-9391
#7
05-16-2014, 01:28 PM
Basic Sponsor
RICETASTIC 
__________________
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
#TeamAIM
997TT SilverSpool - 210.8 mph 1/2 Mile WR Apr 2019, 9.2 @ 168 mph 1/4 Mile Manual World Record , 3.15 60-130 mph , 2.72 100-150 mph , 1400whp E85
996TT SpoolBus - 204.6 mph 1/2 Mile 996TT WR Aug 2018, 9.5 @ 154 mph, 3.23 60-130 mph, 2.5 100-150 mph Manual Porsche World Record, 1400whp E85
997TT SlowBerry - 205.0 mph 1/2 Mile WR Nov 2018, 9.7 @ 170 mph 1/4 Mile , 3.2 60-130 mph , 2.4 100-150 mph , 1420whp E85
ESMOTOR | DO88 | TPC DSC | SYVECS | COBB | IPD | KLINE | XONA | AMS | ID | ERP | SACHS | TURBOSMART | CSF | DODSON |
Trending Topics
#8
05-16-2014, 04:33 PM
Splitter
I bought one of these from Joe earlier this year for my 2003 996TT. He was very good to work with and my splitter arrived on time and in good shape. I have been too busy at work to mount it yet, but I did unwrap it and the quality is good.
So that's a preliminary thumbs up. I would definitely order it again after having inspected the piece in person. I will report out on how much of a difference I think it makes at the track as my TT sees mostly track miles these days.
Very good value for a custom piece
Best,
So that's a preliminary thumbs up. I would definitely order it again after having inspected the piece in person. I will report out on how much of a difference I think it makes at the track as my TT sees mostly track miles these days.
Very good value for a custom piece
Best,
#10
05-16-2014, 06:59 PM
It looks great with the GT2 rear wing! I think the lip is a little too aggressive with the stock wing but now that I see it with a GT2 wing, it's perfect. Nice work Joe!
#11
05-16-2014, 07:07 PM
Almost makes me want to forget about getting a GT2 bumper. Do you make the gurney flap as well?
#13
09-23-2014, 06:46 AM
Hi Guys. My name is Joe, new to this forum. I'm the one who makes this splitter. I work as a mold maker in the fiberglass industry and in my spare time after work I like to play with new stuff. I have a small shop I work out of affectionately called the "slum". If any of you know Surrey I'm in Whalley so you understand. I have been building P car parts for about six years starting with a 951 piece I designed for my own car and now have several models. 944NA, 996 GT3, 2014 Cayman. My next project is 996 GT2 if I can find a donor car for the design work. I can be contacted at 604-329-9391 or email tei@telus.net
This part is designed to make trailer loading easy. the blade portion of the splitter attaches with 7 Dzus fasteners and is off and on in seconds. These are not off the shelf pieces. I make these to provide desired ground clearance for either track or street use or both based on the ride height of the car. I also do the canards n the bottom two pictures of the first post.
Thanks and have a great day everyone.
This part is designed to make trailer loading easy. the blade portion of the splitter attaches with 7 Dzus fasteners and is off and on in seconds. These are not off the shelf pieces. I make these to provide desired ground clearance for either track or street use or both based on the ride height of the car. I also do the canards n the bottom two pictures of the first post.
Thanks and have a great day everyone.
#15
09-23-2014, 09:02 AM
Nice work Joe! I love seeing items produced by individuals in cottage industries. I think this was much more popular in the '70s and '80s?
Good luck with your products, If I had a need, I'd buy from you first!
Good luck with your products, If I had a need, I'd buy from you first!