Hello guys,

I'm happy to announce that we just finished our garrett based turbo kit for 991 TT/S models.

The kit includes;

GTX3067 turbocharges (modified for fitment)
ESM turbo oil/water lines
ESM catless exhaust
ESM equal length v-band headers
ESM adapter flange for stock exhaust
ESM carbon turbo inlet pipes
ESM 90mm turbo intake hoses
ESM intercooler kit with custom upper air ducts
ESM braided vacuum and boost line kit
IPD y-pipe (modified for blow off valves)
IPD plenum (modified for vacuum lines)
Tial 44mm external wastegates
Tial blow off valves
HKS electronic boost controller
Cobb AP with our custom tune (pump and race gas tunes)
Aquamist HFS-4 methanol injection kit with our custom mounts
BMC air filter

Initial tests showed good results even at low boost.

60-130mph acceleration is around 6.1 sec at 1.2 bar and around 5.5sec at 1.6 bar.
(91 oct pump gas + water/meth injection)

We are estimating about 850 crank hp with race gas. (stock engine, transmission and fuel system)

Bigger turbine wheel and exhaust housing lowers the backpressure and results in more efficient power delivery with lower EGTs.

Some significant advantages are;

- You can install the kit without removing the engine. Water lines are bolt-on type to the OEM connections.
- You can retain your own exhaust, so no need to change the exhaust if you have an aftermarket one.

Here are some pics from our 1st kit.

 

Bad ***! Great job guys!

-Mitch

 

Very nice package!


The guys with this platform must be excited that a serious kit like this is out for them!! 6.1 & 5.5 is hauling the mail!!


what does a package like that trap in the quarter ...140 @1.6 BAR??!!

 

Great work Emre,

 

Nice
Is that Kanoo car turbo kit which makes him run 146's?
It is more logical now IMO

 

Congrats Emre, you are opening the way to another level for the 991.
P.

 

No, it had our VTG upgrade.

This is just finished 2 days ago. I built and test it on my own 991 TT/S.

 

Thank you Pascal.

We are working really hard on this platform.

Hope to release more interesting things in near future.

 

Thank you guys!


Thank you Bobby.

I estimate around 142-144 with 1.6 bar.

 

Wonder how your new stroker kit will work with this

 

amazing kit.

 

Emre,
what is that black thing in between the headers and in front of the y-pipe. Is that your fueling solution? Pic is too small to zoom

 

Looks like the HKS boost controller and all the wiring..

 

Doh!!!

 

Awesome ! - Kayihan