We have an incoming Kline X-Pipe exhaust with 100 cel cats going on our 2015 Turbo S.

We currently have a Cobb AP with a stage one file on it. My question is who is running this particular setup and what file would be recommended or have dialed in to extract the most or best performance with the Kline exhaust setup?

Thanks for your input and assistance in advance guys.

 

Hello,

If using an OTS map then you will want to use the Stage 2 file for your gas. So 93 most likely since it looks like you are in Florida.

Let us know if you need anything at all.

-Mitch

 

I just got my kline exhaust, header and filter installed as well. I will switch it from stage 1 91 SBR to stage 2 91 SBR later, but curious to find out what difference the SBR and ABR would make on the 91 octane and 93 octane program. We have 94 octane in Canada and I have always filled up 94 but I was told it is safer to run 91 program instead of 93.

 

Stage 2 runs great with the Kline set up and BMC filter. Many happy users here your gonna love it!

K, I get real mixed info on the 94 fuel up there. I have seen good logs and bad ones myself. Log the 91 stage 2 then the 93 and we can see. (won't matter if it's SBR or ABR for this) It sure would be nice to really get to the bottom of it! At least 2 fuel brand. If you are in the middle you could have it custom tuned too.

Good luck guys! Feel free to reach out with any more questions!