Ahhh, a temporary weight reduction program, I see.

 

Yessir!
Although someone else has suggested that it was on it's way to becoming a Post Apocalyptic Battle Wagon!
😂😂🤪😎

 

Or you can more safely take it to costco without having to worry about the fender bender.

 

Making a little progress....

 

Thanks Sam!
I'll certainly be reaching back out to you once I get a little farther along.

 

Soooo....
My RS front fenders have changed everything! They are much wider than my turbo fenders and my front wheels will not fill the gap, so I they will be up for grabs as soon as I get new wheels.
In the meantime, I also have a new pair of GT3 RS fronts and a single rear GT3 rear wheel in Satin Platinum that I can sell right now!

GT3 RS front: 9.5x20 et50
GT3 Rear; 12x20 et47

*The standard GT3 front wheel (9x20 et55) doesn't fill the fender well as nicely on a Turbo car because it has a narrower track than a GT car and leaves a rather significant gap, whereas the RS front wheel (9.5x20 et50) looks like it was made for a Turbo!
**the GT3 RS fronts coupled with the GT3 rear is the ideal setup for turbo cars with correct fender gap on both ends and also retains the 20" setup to keep the tire bias the same as stock.







Here are the GT3 / GT3 RS wheels:

 

Stock GT3/GT3 RS wheels sold.....

*Signatures will be available once my new wheels arrive!

 

I’m just going to leave this here:



😁

 

DAMN!!! Nice!

 

What the heck!!! Do not leave that right there and post more pics!! Now!!!

 

😂

Thanks Guys!

But that isn’t my car... but a it IS a very close interpretation of what mine will be once it’s completed!

 

Been a while mate getrrrr done already!

 

Trying!!! Unfortunately, I’m at the mercy of the shop’s schedule and parts availability! 🤪😐

 

*update
Car may still look the same, but it is much farther along now;

Front; Fenders have been properly fitted with appropriate brackets to hold vents in place. fender liners installed, RS lip and laterals installed on bumper cover, rerouted A/C lines installed, all shrouds in place... bumper cover will be installed on Monday and THEN the front will be complete and proper!

Rear: Decklid installed, wing installed, new engine cover Installed, center hole cut in decklid for Intake. Eventuri installed, Kline exhaust installed. *Needs to have latch plate clearance issue resolved, accessory wiring harness built for Plug n play solution and reocate GPS antenna.

Im hopeful that these things will be completed this coming week and it will be ready for the paint shop! 🤩















Edit

 

More Teasers!
Ideas...
(Some are already in the works!)




NEW rear model designation decals appropriately renamed as "Turbo RS"



New "Turbo RS" Decal placement will look something like this: