Throttle Reset procedure
#1
Throttle Reset procedure
Does anyone here know the procedure for a Throttle Reset on a 991.
On the 997 the steps are as follows;
Turn ignition to on (not start) for 60 seconds then off for 5 seconds then back on for 15 seconds and then back off.
During process you should not turn the switch to position 2 (start engine).
After the last 15 second step key is returned to position off
Here are the starter switch position steps. On - off - on - off.
Looking for the similar process for the 991 (or is it the same?).
Thanks in advance.
PS. Supposed to reset throttle-by-wire mapping so throttle response becomes sharper as this can become sluggish with time.
On the 997 the steps are as follows;
Turn ignition to on (not start) for 60 seconds then off for 5 seconds then back on for 15 seconds and then back off.
During process you should not turn the switch to position 2 (start engine).
After the last 15 second step key is returned to position off
Here are the starter switch position steps. On - off - on - off.
Looking for the similar process for the 991 (or is it the same?).
Thanks in advance.
PS. Supposed to reset throttle-by-wire mapping so throttle response becomes sharper as this can become sluggish with time.
Last edited by dux; 08-12-2014 at 04:06 PM.
#2
I haven't tried it myself, but I saw this a couple of weeks ago on the subject..
Here is the link.... https://www.6speedonline.com/forums/...tle-reset.html
Here is the link.... https://www.6speedonline.com/forums/...tle-reset.html
Thread
Thread Starter
Forum
Replies
Last Post