hey guys
where are the jack points on the 996tt ?

 

Rear of the front wheel and forward of the rear wheel. Oval hole in the frame.

 

There is a little triangle indent in the black side-underskirt, pointing to
each one.

 

it has also been said that you can jack from the bottom motor seam with a block of wood across the length of the motor. there are a few good DIYS on the forum which also point out in detail the jacking points and what to look for. dont forget the stands.

 

thanks guys

 

I was able to get the rear of the car up on blocks using the OEM tire changing jack, if that is what you are trying to do...

With the car at full height on the front jack point, a piece of 6x6 PT, (2) 3/4" thick pine boards and a hockey puck slipped right in at the rear jack point Joe was referring to. You can do one side, then the other. And the wood makes a very stable platform.