Ipod conversion on 01 996 Turbo?
Ipod conversion on 01 996 Turbo?
OK so i've searched, and can't seem to figure out if i'll be able to add an ipod ICELINK or something to my 01 996 Turbo. Mine has the factory navigation. Is there an ipod adapter available for it? Is it controllable from the factory deck?
any other way to have a music harddrive system controllable from the factory deck?
Thanks.
any other way to have a music harddrive system controllable from the factory deck?
Thanks.
I've got an 01 with the Nav. I hooked up my Ipod by disconnecting the factory CD changer and hooking up the ipod to the cd input. Now, when you push the cd button in the cabin, the ipod come on....works just fine!
I've heard good things about the Dension Ice Link
http://www.dension.com/icelinkone.php
All you need is the head unit removal tool (like $1 on ebay) and it's a total plug and play. 5 minutes to install. Make sure you get the pre-03 kit (those are fiber optic). I hear it just runs on the "aux" setting on stock head unit. http://search.ebay.com/search/search...tool&category0=
I know bumber plugs carried them for a while?
I want one too if you locate what unit it is.
http://www.dension.com/icelinkone.php
All you need is the head unit removal tool (like $1 on ebay) and it's a total plug and play. 5 minutes to install. Make sure you get the pre-03 kit (those are fiber optic). I hear it just runs on the "aux" setting on stock head unit. http://search.ebay.com/search/search...tool&category0=
I know bumber plugs carried them for a while?
I want one too if you locate what unit it is.
Last edited by Turbo Fanatic; Jun 14, 2008 at 08:53 AM.
This is what i found,
http://www.discountcarstereo.com/detail.aspx?ID=993
just need to tap into the ground/power from the radio harness and it's plug and play. It does not control the ipod but does charge it. I was unable to find any fully intergrated ipod solution for the 01 996....
just remember after the install you have to enable the aux function thru the radio. http://www.beckerautosound.com/pdf_g...directions.pdf
http://www.discountcarstereo.com/detail.aspx?ID=993
just need to tap into the ground/power from the radio harness and it's plug and play. It does not control the ipod but does charge it. I was unable to find any fully intergrated ipod solution for the 01 996....
just remember after the install you have to enable the aux function thru the radio. http://www.beckerautosound.com/pdf_g...directions.pdf
Trending Topics
Is the ipod controllable from the factory Deck? If so, What did you use to connect?
To use the ipod, just push the cd button on the head unit. To switch songs on the ipod however, you still need to use the ipod controls.
hope this helps
Sameer
I pulled out my stereo to look back there and couldn't get the keys out!
Here is to remove the keys once they're in
http://www.pro-fit-intl.com/Adobe/DM-20-22.pdf
Here is to remove the keys once they're in

http://www.pro-fit-intl.com/Adobe/DM-20-22.pdf
I ended up doing the same, I have an '01 with Factory Nav. Not the best way, but it works.
i have on of the denison units that integrates into factory becker (non-nav) unit. It replaced the CD changer and you utilize playlists 1-6 and it directly controls and drives the ipod. pretty cool. i am willing to part with it as i changed my setup. i'll sell it for $110 + shipping (that's what i paid for it)




