Actuator rod measurements

Reply Subscribe

Thread Tools

Rate Thread

Jun 18, 2009 | 09:39 AM

jgx50

Thread Starter

Registered User

Joined: Jan 2008

Posts: 28

From: south carolina

Rep Power: 20

Actuator rod measurements

Ok so this morning i got under my car and found out that my actuator rods were not set the same (had different measurement). Anybody know what they should be set at?

Thanks in advance

Jun 18, 2009 | 10:32 AM

tvurt

Registered User

Joined: Apr 2009

Posts: 712

From: Akron, OH

Rep Power: 58

On your wastegates? There is no single setting. You need to pressurize them and have the wastegate start to open somewhere between 8-12 psi, depending on your tune and turbos.

Jun 18, 2009 | 12:01 PM

DERBOOST

Registered User

Joined: Feb 2007

Posts: 982

From: Montana

Rep Power: 63

Quote:

Originally Posted by tvurt

On your wastegates? There is no single setting. You need to pressurize them and have the wastegate start to open somewhere between 8-12 psi, depending on your tune and turbos.

100% correct....tons of threads on this one.... .005 movement@12 psi will hold aprox +/- 1.3 bar