I adjusted my wastegate actuators to crack at 8psi today. They were cracking at 5psi. I have not tried it yet. I was wondering if anyone else had done this?

I could not go more than 8psi on the drivers side although the passenger side could have gone to 10psi. But I adjusted them to 8.

All comments would be appreciated.

Thanks

SWR.

 

ARD and I are both running 8.5-8.75 on ours using a gauge to balance them out so that they both open at the same psi.

 

That is exactly what I did. What boost do you get from a reading perspective in actual driving WOT conditions?

Thanks

SWR

 

I routinely get 1.2 with an occasional 1.3....actually lately, 1.3 has been showing up more frequently...I need to check and see what's going on. I really don't want to see more than a consistent 1.2.