Will gt2 suspension fit on a 996TT?

Saw a used one , supposedly has awd front camber plates?

 

I would think so... same chassis. Are you talking about the coil overs or the suspension parts?

 

thanks Ari, the coilovers...

 

They will but you'll need to buy a sleeve from Moton or have one fabricated. You will also need to get different sway bar drop links. I recommend Agency Power, because the front links attach to the wheel carrier pinch bolt and eliminate attaching to the strut which is a good thing. The rear links are AP dog bones. Good luck, TXGold

 

I think a setup like this would be a nice xmas present

 

I think Dan at Vivid Racing sells complete kits that are better than the GT-2 suspension. I would call his office.
Robert

 

I just did this swap...I documented a short write up if you search my name on here. It rides pretty good. I have Agency links up front and some other aftermarket ones in the rear. Don't install these at home unless you've done 996tt suspension before, it is a pain.

 

thanks guys

great thanks man... i'll search your thread..