Best Y-pipe for a 996 GT2
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 159
From: Valhalla
Rep Power: 27
Best Y-pipe for a 996 GT2
We have tested one y-pipe but fitment was very poor .... need something that fits to 100 % and that is 3" so what is the best solution
Car has upgraded IC's upgraded turbos K24/20G Billet bigger plenum etc. .
Thanx in advance for any suggestion
Car has upgraded IC's upgraded turbos K24/20G Billet bigger plenum etc. .
Thanx in advance for any suggestion
Registered User
Joined: Jul 2003
Posts: 2,957
From: Texas
Rep Power: 456
Which one have you tried?
Banned
Joined: Jul 2008
Posts: 1,144
From: Florida
Rep Power: 75
U need to go with Protomotive/Markski intake system plus Ford maf otherwise those 20g's will choke
Registered User
Joined: Sep 2006
Posts: 7,481
Rep Power: 707
i would do markskis with the blow throuhh setup since you are doing 20s. and do the whole intake system also , relocation of the intakes in the fenders, your call will be FAST! b moors did over 200 at the texas mile with the blwo through setup and 20s
Registered User
Joined: Aug 2009
Posts: 2,496
From: Houston Tx
Rep Power: 187
y pipe for stock airbox?
if so BBI has a nice cast unit, Speedtech has one, Vivid Has one, I liked the boost logic unit aswell. and Neil at switzer might have something.
none of these above units will fully let your car breathe for the 20g's but its better then what you have now. as long as u already have inlet pipes
for blow through MAF setups, Protomotive, BBI, Markski,
if so BBI has a nice cast unit, Speedtech has one, Vivid Has one, I liked the boost logic unit aswell. and Neil at switzer might have something.
none of these above units will fully let your car breathe for the 20g's but its better then what you have now. as long as u already have inlet pipes
for blow through MAF setups, Protomotive, BBI, Markski,
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 159
From: Valhalla
Rep Power: 27
Iam flexible ;-) atm i have a agency upgraded airbox and all the other pipe works are changed bigger plenum as well.
y pipe for stock airbox?
if so BBI has a nice cast unit, Speedtech has one, Vivid Has one, I liked the boost logic unit aswell. and Neil at switzer might have something.
none of these above units will fully let your car breathe for the 20g's but its better then what you have now. as long as u already have inlet pipes
for blow through MAF setups, Protomotive, BBI, Markski,
if so BBI has a nice cast unit, Speedtech has one, Vivid Has one, I liked the boost logic unit aswell. and Neil at switzer might have something.
none of these above units will fully let your car breathe for the 20g's but its better then what you have now. as long as u already have inlet pipes
for blow through MAF setups, Protomotive, BBI, Markski,
Trending Topics
Basic Sponsor
Joined: Apr 2008
Posts: 3,332
From: NorthEast US
Rep Power: 240
Our 2.5" Y-Pipe w/ 75mm TB opening fits well. We have many on GT2's. We retain OEM location for all hoses and sensors, too.
Billet aluminum OEM MAP sensor housing
Billet aluminum OEM MAP sensor housing
__________________
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials facebook SpeedTech Exhaust Videos
991.2 GT3 RS Weissach Racing Yellow
991.2 Turbo S GT Silver
991.2 GT3 Chalk (Manual)
2022 Cayenne White
former 1972 911T white, 1984 911 3.2 Targa black, 993 cab white, 993TT arena red, 993TT silver, 996TT speed yellow, 991.1 GT3 white
www.speedtechexhausts.com
info@speedtechexhausts.com
Testimonials facebook SpeedTech Exhaust Videos
Last edited by John@SpeedTech; Nov 9, 2010 at 07:33 PM.
we only do the blow thru maf solution but it also gets rid of the kinks in the stock intake...
but I am confused? why are you keen on getting a 3" when we all run 2.5" on our 1000 rwhp cars?
best
markski
but I am confused? why are you keen on getting a 3" when we all run 2.5" on our 1000 rwhp cars?
best
markski
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
Thread Starter
|
Registered User
Joined: Jun 2009
Posts: 159
From: Valhalla
Rep Power: 27
Sorry i meant 2,5" iam not that used to " we in the old world use mm and cm :-) except for the British empire and a few others....
Please consider us since you are running our Intake and Intercoolers - https://www.6speedonline.com/forums/...-3-y-pipe.html
Custom colors are FREE
Custom colors are FREE
Nice!!!
__________________
SuncoastParts.com
Your #1 Source for Genuine Porsche Parts and Accessories on the Web!
Visit us at http://www.SuncoastParts.com
Call us at: 877-923-1700
Email us at: Parts@SuncoastParts.com
Follow us to stay connected:
Join Our Newsletter | Facebook
SuncoastParts.com
Your #1 Source for Genuine Porsche Parts and Accessories on the Web!
Visit us at http://www.SuncoastParts.com
Call us at: 877-923-1700
Email us at: Parts@SuncoastParts.com
Follow us to stay connected:
Join Our Newsletter | Facebook
Registered User
Joined: Jan 2010
Posts: 239
From: kuwait
Rep Power: 29
Please consider us since you are running our Intake and Intercoolers - https://www.6speedonline.com/forums/...-3-y-pipe.html
Custom colors are FREE
Custom colors are FREE