Hi,

Finally the upgrade is done. However, after the complete parts upgrade the ABS+PSM light turns on .

Next week I will install the new ECU maps.

Do you think the MAF is not OK or the lights turn on because I didnīt install the new maps?


Upgrade:
- Switzer Billet K16s hybrid turbos;
- 1 Bar westgate;
- 997.2 RS Intercoolers;
- KN Inbox Filter;
- Silicone Hoses;
- Forge DV;
- AP Y pipe;
- AP 78mm Plenum;
- FPR 5 BAR;
- Cargraphic quiet exausht.

Thanks,
VS

 

You most likely blew the MAF or have a boost leak. Check all the hose connections first.

 

All the connection and hoses have been checked. The hoses have new orings and new clamps.

Probably it was a coincidence and I need to buy a new MAF!

Thanks,
VS

 

Boost leak test from turbos not just visual check. That's first thing before replacing something. A lot of work was done and could be anything loose.

 

https://www.6speedonline.com/forums/...ig-w-pics.html

http://www.911tuning.com/996-Turbo/M...ter-p-127.html

 

would love to hear how the switzer K16's perform... please let us know what you think of the upgrade after you get it all correct and drive it..

 

whoever installed all those parts especially the TB and plenum probably messed up... you need a pressure test from the TB then the turbos...
you will be surprised what you find...