in pdf parts catalog. I'm missing the bolt on the turbo cover plate, the cover plate is part 14 in the link below. The bolt is on the side of the turbo plate cover, I think it attaches the plate cover to the oil containment container (part 8 in the picture).

http://www.pelicanparts.com/cgi-bin/...0COVER%20PLATE

The bolt is fairly short in length, probably was left out during servicing.

Was ordering some other parts, was hoping to add this to my order.

Thanks.

 

I would just take the other one off the other side and go to homedepot etc. and match it up. I assume your taking about the short 10mm bolt that holds the heat shield over the turbo and attaches to the turbos oil container.

 

That may be best and likely cheaper

 

No problem, also if you can't find a bolt short enough, just buy the long one and corresponding nut to fit, thread it on then cut the bolt however you want and then back the nut off. It will true up the threads and make it easy to install.

 

Strange I have lost exactly the same bolt on one of my turbos...