Hi all, been searching the forums for an answer and can't quite find a for sure one.

I have a line on Carrera sII 19 inch rims 8x19x57mm offset front and 11x19x67mm rear offset.

Will this fit a 996 wide body Turbo? If not, what is the needed spacer.

Any help on who is running this set up would be greatly appreciated.

Thanks in advance.

 

spacers will be needed. your looking at about 20mm to deep an offset. i just installed new wheels with 40 et front and 45mm et rear and have no issues but the rear is tight maybe 3 to 4 mm clearance

 

Steve, Thanks for the info. After alot of searching, I figgured these were the narrow body rims and would require spacers and the purchase of new rear tires, so they were not the deal they appeared to be. BTW, still working on datalogging with the durametric.

 

i think i have the durametric figured out. i ordered the forgestar cf5 wheels and mounted 315/30-18 and 235/40-18 pzero tires. perfect fit zero rub and fender flush! the 40et front 45 et rear is the bomb!