Dash Light Color Changes
I may do a writeup on the gauge LED change when I do it. Theres not really any good information online about it.
Any Idea what spec LED's these are? Voltages or anything?
Those are from the HVAC, not guages. I got an extra HVAC control when I bought my car. Just took it apart for the sake of hopefully someone doing a write up on how to make them blue, or red, or white, or any color i want. I have an 01 so my gauges are not soldered LED's, but I would love to do LED's there too.
Stay tuned
So I got white :P
I used superbrightleds.com for the 996 dash, doors, overhead console center light all in blue. Car is black on black and the blue gives enough light to read all the gauges and not blinding at night if you open the door. In the upper center I just did the center festoon bulb and left the two side reading lights white in case you actually ever need light! Super easy to replace them all. A little fiddly to get the upper console thing on the dash off. Don't fret, If I can do it...... Changed the side marker lights to white and added DRL's in the front grill. This was the C2, for the Turbo I also dislike the orange but not sure if I'll go color since interior is saddle and metallic gray outside. Maybe just clean white. Orange reminds me of 'warning lights' :-(
Hello Everyone,
I'm looking into possibly tackling the task of changing out the LEDs in my dash and Hvac system to a different color. Probably bright white or red. Does anyone have any experience with this?
Is there some sort of electrical diagram or blueprint somewhere showing the circuit layout of the back of the gauges? I'm fairly decent and soldering but I'm not sure which type of LED's (voltage, size, etc..) I need to get.
Thanks for any help,
Taboo
I'm looking into possibly tackling the task of changing out the LEDs in my dash and Hvac system to a different color. Probably bright white or red. Does anyone have any experience with this?
Is there some sort of electrical diagram or blueprint somewhere showing the circuit layout of the back of the gauges? I'm fairly decent and soldering but I'm not sure which type of LED's (voltage, size, etc..) I need to get.
Thanks for any help,
Taboo
https://www.6speedonline.com/forums/...ta-3076-a.html
I'll only be doing the left and right dash screens.
James,
I did a whole thread on how to do the dash light LED change. Search it up, or find it by looking at threada started by me.
I did a whole thread on how to do the dash light LED change. Search it up, or find it by looking at threada started by me.





