Low boost 996 Turbo
Thread Starter
|
Registered User
Joined: Jun 2013
Posts: 23
From: Moscow,Russia
Rep Power: 0
Low boost 996 Turbo
Hello from Russia)
I need your help!
Auto (996 Turbo S) does not given a boost after the chiptuning! Blows is 0.9 bar
There is a new exhaust with 200 cel cat.
There are no errors! No leakage!
What it can be?
I have 2 versions:
The first version about detector N75, it was removed and given voltage , it works! May be stuck during overboost?
The second version about MAF, how to check it? We removed the connector from it, nothing to changed! Auto has been to go worse or not?
Very interested your thoughts and advice! What it can be?
Sorry for my English)))
I need your help!
Auto (996 Turbo S) does not given a boost after the chiptuning! Blows is 0.9 bar
There is a new exhaust with 200 cel cat.
There are no errors! No leakage!
What it can be?
I have 2 versions:
The first version about detector N75, it was removed and given voltage , it works! May be stuck during overboost?
The second version about MAF, how to check it? We removed the connector from it, nothing to changed! Auto has been to go worse or not?
Very interested your thoughts and advice! What it can be?
Sorry for my English)))
Registered User
Joined: Mar 2008
Posts: 677
From: port coquitlam canada
Rep Power: 67
Get a duramitric and get it checked. I had an issue where it would go into "limp mode" it would not boost over 0.4 where normally it would boost 1.0 with my flash.
Turned out to be broken wires on the engines knock sensor. But there was no lights on the dash to show there was a problem but the durametric picked it up.
Turned out to be broken wires on the engines knock sensor. But there was no lights on the dash to show there was a problem but the durametric picked it up.
who flashed the car? often the EURO black market sells unknown tunes... be careful...
markski
markski
__________________
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
2001 996TT 3.6L and stock ECU
9.66 seconds @ 147.76 mph 1/4 mile click to view
160 mph @ 9.77 seconds in 1/4 mile click to view
50% OFF ON PORSCHE ECU TUNING BLACK FRIDAY SPECIAL
Thread Starter
|
Registered User
Joined: Jun 2013
Posts: 23
From: Moscow,Russia
Rep Power: 0
The problem has not gone! I put the chip from another company (USA), nothing has changed! The car goes the same that before the chip and after.
There are no errors! There are no leakage! I tested the car in two services, but found nothing.
I can not understand, why nothing no changes after the chip? Car rides are not better and not worse, should not be the errors pressurization?
Is there any chance that the program is not recorded and it is the problem with ECU?
There are no errors! There are no leakage! I tested the car in two services, but found nothing.
I can not understand, why nothing no changes after the chip? Car rides are not better and not worse, should not be the errors pressurization?
Is there any chance that the program is not recorded and it is the problem with ECU?
Registered User
Joined: Nov 2013
Posts: 1,052
From: Florida
Rep Power: 154
Get a duramitric and get it checked. I had an issue where it would go into "limp mode" it would not boost over 0.4 where normally it would boost 1.0 with my flash. Turned out to be broken wires on the engines knock sensor. But there was no lights on the dash to show there was a problem but the durametric picked it up.
Edit: fixed!
Last edited by Vantaredoc; Dec 13, 2013 at 08:10 PM.
Thread
Thread Starter
Forum
Replies
Last Post
BlackMarketRacing
996 Turbo / GT2
37
Dec 8, 2015 01:49 PM
PelicanParts.com
996 Vendor Classifieds
0
Aug 20, 2015 02:41 PM
PelicanParts.com
996 Turbo Vendor Classifieds
0
Aug 20, 2015 02:40 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
Aug 20, 2015 02:37 PM
PelicanParts.com
996 Turbo Vendor Classifieds
0
Aug 18, 2015 03:43 PM
