The one I have is made by Master Steff and Herman. It is a Europipe.

 

Well, for me, there is life after EP Loud afterall. It's call PSI Loud. Haha. It has a different note than the EP, but it is absolutely intoxicating to hear and FEEL. Yes, I can feel the rumble and burble right up my *** and spine with the PSI exhaust. Like Rich, I can't be happier with my new pipes.

Feel free to let me know if anyone wants to have a listen from 0-6000 rpm

 

Europipe all the way!

 

Hey Collin,

Nice to meet you yesterday at the meet and thanks for taking me over to meet Rich to hear both yours and his exhaust. Both are really really nice and they each have their own distinct tone to them. Now mind you I only had the chance to hear them at the lot. I can only imagine the beautiful sound they make at WOT.

I hope to be at the next meet! This time with my car.

 

Hey scslite - it was good to meet you yesterday. Too bad we didn't hook up until right when we were leaving. We'll definitely take you for a spin next time.

The PSI and Europipe are definitely very different, but both are very cool! That PSI rumble is something else.

- Rich

 

I believe PSI played on the Europipe experience. They really aren't that different (that isn't to say there isn't any differences). I have seen them both and the Europipe weld quality is definitely superior. That isn't to say the PSI quality is bad. It simply isn't the same.

 

I agree - when LOOKING at both, they both show great build quality. Sound-wise, there's a distinct difference. The PSI has that burble that the Europipe doesn't quite do.

 

About two years ago my Europipe mounted on a motor just shy of 900 hp passed a California Inspection Station sound test. Can the PSI do the same? You know the fine for exceeding the sound thrushold if they haul you into a Calif. Station and fail can be $2,000.00.

 

Based on what I've heard, I would guess that the PSI has less of a chance than the Europipe. The PSI is just plain louder. Also has that burble when you let off of the throttle. I'm so glad that 969 picked up the PSI products though so that those of us on the Left Coast can check 'em out. NOT for the faint of heart.

 

Cody,

You haven't heard my Europipes! Just ask sharkster. They are second to absolutely nothing.

Compare 85 mm and dual 60 mm tubes on each side to whatever anyone else has to offer. My backpressure is very near open pipe readings.

 

Yep - I look forward to hearing them some time. Hopefully at a big meet that brings the geographies together, or will it have to be the next (??) shootout?

- Rich

 

It should not be a problem for PSI. The PSI at it's loudest, below 3k rpm, is no louder than EP at it's loudest peaks, which is around 2400 rpm in 3rd gear going up a hill, or at 3800 rpm.

The PSI pipes softens and stays at a constant pleasant low rumble after it passes 3k rpm.

 

We don't have to take anyone's word for it. Just bring your car and pipes to our next meet and let us listen to them first hand. Would love to have a pipes concerto in the parking lot and around the block. We have a perfect test route around the block

 

Last pic!



I believe these Europipe's have an exhaust area approximately 60% greater than any PSI exhaust.

 

That's all fine. Is this a custom job or can anyone buy them?

The PSI exhaust is tested with the PSI programming as a package. It works hand in hand together to give the optimal performance.