Problem with Oil Level indicator,Please help
#1
Problem with Oil Level indicator,Please help
Hello,
I have a problem in 996 Turbo with oil level sensor ,
I have message on cluster "Oil level indicator failure"
We replaced oil level sensor and oil pressure sensor and still nothing.
Any advice where could be a problem?
I have the message "Oil level indicator failure" just after oil warmed up
Thanks for advice
Rgs
I have a problem in 996 Turbo with oil level sensor ,
I have message on cluster "Oil level indicator failure"
We replaced oil level sensor and oil pressure sensor and still nothing.
Any advice where could be a problem?
I have the message "Oil level indicator failure" just after oil warmed up
Thanks for advice
Rgs
#3
It could be your gauge cluster computer is fried I once had the unfortunate situation of having my battery installed backwards and it fried my ability to check the oil level, North Hollywood Tach replaced my gauge cluster computer for $750. But always check the wiring to your sensors as well they could be corroded.
#6
Thanks, We will replace cluster gauge, because propably in this car somebody also has some issue during replaced battery some time ago.
#7
Running into this same problem on a 2002 turbo. Once engine at operating temp oil level failure pops up. DId you have any success with the cluster? I have replace the level and temp sensor for the oil. Oil changed. The pressure sensor is working so I am holding off on replacing it.