Custom Exhaust info request....
Thread Starter
|
Registered User
Joined: Aug 2004
Posts: 2,200
From: NJ
Rep Power: 343
Originally Posted by iLLM3
Raudel mentioned it in another thread I believe but I forgot. For a straight through exhaust I was HIGHLY impressed. Had such an exotic resonance while cruising and under boost with his turbos it was monsterous, the only other exhaust I would go to since I'm spoiled by my RUF 590 right now!
Registered User
Joined: Oct 2006
Posts: 981
From: NV
Rep Power: 61
Originally Posted by Powell
SallyMobile can you get some pictures of your setup for me also? I'd like to see how yours is compared to Craigs.
Picture from in back and below (bottom muffler isn't actually visible from behind car):
Picture from directly underneath and to the right showing both cans:
One of the cats, from below:
Tips:
I'm planning to go with different tips on the next exhaust, probably dual wall, polished, like this:
Registered User
Joined: Oct 2006
Posts: 981
From: NV
Rep Power: 61
Originally Posted by Powell
SallyMobile did you fab that yourself or have a shop do it? Also how much was the total of the parts, if you dont mind me asking?
The parts were about $1k or so. The real issue is the bends. Even with all of the bends necessary, it's still very hard to make because of the long mufflers. Going with the standard 12" muffler (or even 17 1/8") would be much easier. With a 21" muffler (pretty much the longest you can put in there), you need to be pretty exact with the bends to get everything to fit correctly.
Registered User
Joined: Oct 2004
Posts: 2,344
From: Bay Area
Rep Power: 132
Originally Posted by str8blst
Thanks for the info! I spoke with Raudel earlier today and he was able to answer some questions for me.... Seems like his setup is probably what I will end up with...
Hey guys! Just saw this thread now. For those of you interested in my exhaust. Its stainless 2.5" piping with 2 resonators and twin slash cut 3" tips.
This is a similar setup to Markski's, but I think he has 3" piping and no tips, but same resonators. Mine was fabbed up by Protosport which is a Protomotive dealer here in Jersey.
I first tried 3" piping but I couldn't take the drone. The 2.5" and resonators tokk care of that and no CEL's.
Raudel
This is a similar setup to Markski's, but I think he has 3" piping and no tips, but same resonators. Mine was fabbed up by Protosport which is a Protomotive dealer here in Jersey.
I first tried 3" piping but I couldn't take the drone. The 2.5" and resonators tokk care of that and no CEL's.
Raudel
Originally Posted by iLLM3
Go with Raudel's exhaust setup, especially since you will have a similar setup like he has in the near future. His exhaust sounds NUTS and is free flowing 
Thanks!.... You're car sounds intoxicating as well!
Registered User
Joined: Dec 2006
Posts: 1,771
From: NYC
Rep Power: 136
Check out my post here: https://www.6speedonline.com/forums/...ad.php?t=84651
I just got done with my custom exhaust and it is SIIIIIIIIIIIIICK!
- full T304 stainless
- 3" all the way through
- 100 cell race cats
- straight-through "cylinder" mufflers
- 2 cut stainless tips each side, 3" inside and 2.5" outside
Combines the best parts of Craig, Markski, and SallyMobile exhausts. Couldn't be happier.
Good luck with yours.
I just got done with my custom exhaust and it is SIIIIIIIIIIIIICK!
- full T304 stainless
- 3" all the way through
- 100 cell race cats
- straight-through "cylinder" mufflers
- 2 cut stainless tips each side, 3" inside and 2.5" outside
Combines the best parts of Craig, Markski, and SallyMobile exhausts. Couldn't be happier.
Good luck with yours.
some pics of my custom made straight pipes with cats
http://wirx.ee/porsche/?dir=.%2Fsumps%2F
some videos too
http://www.youtube.com/watch?v=bnY2jCTnIDk
http://www.youtube.com/watch?v=PVbzBFpDB8U
I'm 101% sure that I have more power with them...
http://wirx.ee/porsche/?dir=.%2Fsumps%2F
some videos too
http://www.youtube.com/watch?v=bnY2jCTnIDk
http://www.youtube.com/watch?v=PVbzBFpDB8U
I'm 101% sure that I have more power with them...