Wheel spacers on C2
#31
I am very happy with this mod - car looks much better
#34
I think you can run up to 21mm on a nb car, but you will be at razors edge and may need to dial in some neg camber. I have 15mm on all corners and could easily go 18mm on rear. Using HR spacers and longer lugs from automotion.com (best price).
Alignment is to GT3 street specs.
Alignment is to GT3 street specs.
#35
The H&R TRAK ones are the best. They're hubcentric and come with longer bolts. The spacers that have studs built in (from other makers) are going to be heavier due to the weight of the studs. In addition, if you went go with aftermarket rims, those spacers w/studs may not work with your non-oem rims. They didn't work for my Volks. 15mm all around will make a world of difference in both looks and handling with your oem rims.
On another note, I believe the stock oem my02 5 spokes were 8" for the front front and were not available in 8.5".
On another note, I believe the stock oem my02 5 spokes were 8" for the front front and were not available in 8.5".
Thread
Thread Starter
Forum
Replies
Last Post
PelicanParts.com
930 Turbo Vendor Classifieds
0
08-18-2015 04:01 PM
PelicanParts.com
Boxster/Cayman Vendor Classifieds
0
08-18-2015 03:51 PM
PelicanParts.com
GT3/GT2/GT Vendor Classifieds
0
08-18-2015 03:42 PM