Going off one of their reviews

Comments: I wanted to replace the IMS bearing on my 2000 Carrera for a piece of mind. I didn't know if I had a double row or single row bearing so this product fit the ticket. I used the LN engineering toolkit for installation. I plan on replacing with the correct LNE bearing at the next clutch change. Because of the oversized spindle on the Pelican kit the LNE bearing puller will pull the original bearing out but will not remove this bearing using the spindle so a different solution is needed to remove it or reset it if it installs crooked



So what do you do when you want to pull out pelicans bearing?

 

maor- the LN bearing removal toolkit now contains adapters that will work to pull the bearing out with the old bolt *and* the new bolt. So, there's no problem removing the bearing in the future if you need to.

You may have read Pelican's IMS Bearing Replacement DIY Article but if not it's a great read with tons of info/instructions.

Hope that helps but if you have any questions, reply here or call us directly and we'll assist. Thank you
888.280.7799

Mark/Pelican Parts

 

Or make an adapter by welding two nuts together....