can you please help me?
just bought front and side repeaters and i don´t know how to fit them...
thank you

 

repeaters?

 

US Translation turn signal lenses. They are held in by a clip and snap out with light force. you can do this by hand or with a screw driver. The bulb/harness just twists in pretty simple install.

 

ooohhhh.... if you talking about the side markers the install is very simple, just pull on the rear most part, the area that is exposed in the wheel well, pull out and away from the car, it will pop off, don't pull too hard as there isn't too much slack in the wire, then simply twist the bulb housing, remove and replace into the new clear side marker and reinstall by first placing te front of the side marker in, you'll see a lip on the side marker that needs to be set in first, then just apply light pressure to the rear and it will snap in.....

heh repeaters

 

lol
sorry it is markers in th US.
thanks

 

do you have alink whit pictures?
my wheel well are completely closed...
thank you again

 

sure the wheel well is completely closed , (you can't get behind the marker) but you can just place your finger tips on the area of the marker that extends into the wheel well and use it to pull the marker out and toward you if you are positioned perpendicular to the wheel and marker...
let me know if thats and adequate explanation...