Just browsing the Tire Rack upgrade garage, and noticed these wheels similar to the BBS LM / Cargraphic racing wheel.

There are two sizes for the rear 19x10 or 19x11, which would be better suited for a C2 Cab?

Anyone with opinions or experience please reply. I'm especially interested in learning more about the offset and how well the wheel wells fill out with these wheels.

 

The fronts are 19 x 8.5 50et, and the rears are 19 x 10, 45et or 19 x 11, 45 et - your choice. For a narrow body I would run a 10 with a 265 tire. We have them on the way and they will be in on approx. the 1st. Overall appearance is very similiar to the LM at half the price and Rial is one of Germany's largest OE wheel suppliers. Give me a call to order.

 

Here's a picture of the wheel:

 

Damon,
no way u can get that 19x11 ET45 in the 996 narrow C2 rear & too short for the widebody TT/4S. what's the target aud?

 

Thanks. Does the 8.5 and 10 fill out the wheel well better than the stock wheel?

 

I was offered a "sponsored" set of these back when I was looking for wheels, offset didn't work correctly for the C2.

 

better than stock & will work. the rears are 20mm out from OE wheel (18'' Carrera 5-spoke). a little too much for me though.

 

Thanks Arling, I'm running Carrera 5 spoke presently.

 

I agree its awfully aggressive for a narrowbody. Fender rolling would be a minimum if going with it. That's why I recommended staying with the 10"